Glas und Keramik

2025

• Anandakrishnan SS., Nelo M., Tabeshfar M., Kraft V., Khansur NH., Peräntie J., Bai Y.:
  Influence of the permittivity between fillers and binders on the properties of upside-down composites for recycling purposes
  In: Materials Advances 6 (2025), S. 6694-6710
  ISSN: 2633-5409
  DOI: 10.1039/d5ma00554j
• Benitez Castro A., Khansur NH., Castro-Hidalgo A., Saldarriaga-Montoya VD., Cruz-Muñoz B., Muñoz-Saldaña J., Webber KG.:
  Mechanically induced surface damage and resulting thermal instability in polycrystalline 0.94Na1/2Bi1/2TiO3-0.06BaTiO3
  In: Ceramics International 51 (2025), S. 39411-39424
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2025.06.175
• Bezold A., de Jesus Rodrigues G., Vollhüter J., Nagel O., Köbrich M., Stark A., Mills MJ., Neumeier S.:
  Influence of Fe additions on the property profile of high-strength CoNi-based superalloys
  In: Journal of Applied Physics 137 (2025), Art.Nr.: 195102
  ISSN: 0021-8979
  DOI: 10.1063/5.0268680
• Cicconi MR., Kimura K., Bradtmüller H., Deng H., Kohara S., Onodera Y., Hayakawa T., Shimono S., Hayashi K., de Ligny D.:
  Unraveling the structural complexity of niobate units in aluminosilicate glasses and glass-ceramics
  In: Materials Advances (2025)
  ISSN: 2633-5409
  DOI: 10.1039/D5MA00082C
• Deng H., Xie L., Martin A., Martin A., Webber KG., de Ligny D., Cicconi MR.:
  Exploring the dielectric properties, glass ability and ferroelectric phases in the BaO-Bi2O3-TiO2-B2O3-Al2O3 system
  In: Journal of the European Ceramic Society (2025), S. 117527
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2025.117527
• Diamanti V., Elsayed H., Fey T., Bernardo E.:
  Effect of MgO and Al2O3 precursors on 3D-printed cordierite lattice structures by a novel emulsion-based PDC route
  In: Journal of the American Ceramic Society (2025)
  ISSN: 0002-7820
  DOI: 10.1111/jace.70037
• Eckstein U., Webber KG.:
  Using high-throughput processing and characterization methods to investigate the role of synthesis conditions on the energy storage properties of a high entropy oxide
  In: Japanese Journal of Applied Physics 64 (2025), Art.Nr.: 100801
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/ae08c1
• Ege D., Khalili V., Lu HH., Reinfelder H., de Ligny D., Boccaccini AR.:
  Physical properties of zinc, silver, or cerium ion doped borate glass incorporated PCL/gelatin electrospun fibers and their interaction with NG108-15 neural cells
  In: Journal of Materials Science: Materials in Medicine 36 (2025), Art.Nr.: 20
  ISSN: 0957-4530
  DOI: 10.1007/s10856-025-06863-w
• Funk S., Wolf E., Weichelt M., Martin A., Kakimoto Ki., Fey T.:
  Keep it simple: Fast processing of periodic BCZT structures by combination of VPP and replica technique
  In: Open Ceramics 22 (2025), Art.Nr.: 100761
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2025.100761
• Gadelmawla A., Yamamoto Y., Kimura K., Sekhar H., Happo N., Webber KG., Matsushita T., Tajiri H., Hayashi K.:
  Application of x-ray fluorescence holography to a single grain in polycrystalline ferroelectric ceramics
  In: Review of Scientific Instruments 96 (2025), Art.Nr.: 035107
  ISSN: 0034-6748
  DOI: 10.1063/5.0242691
• Günther L., Thomas JU., Hermann J., Ohlinger A., Friedrich A., de Ligny D.:
  Overcoming Challenges in Transparent Material Assembly: Advances of Ultra Short Pulse Laser Welding
  Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XXV 2025 (San Francisco, CA, 26. Januar 2025 - 29. Januar 2025)
  In: Peter R. Herman, Roberto Osellame, Adela Ben-Yakar (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2025
  DOI: 10.1117/12.3042863
• Günther L., Thomas JU., Hermann J., Ohlinger A., de Ligny D.:
  Ultra-Short-Pulse Laser Welding of Glass to Metal with a Shear Strength Above 50 MPa
  In: Micromachines 16 (2025), Art.Nr.: 538
  ISSN: 2072-666X
  DOI: 10.3390/mi16050538
• Henderson GS., Bancroft GM., Nesbitt HW., Dean PA., Cicconi MR.:
  The high frequency Raman bands of vitreous SiO2
  In: Physics and Chemistry of Glasses-European Journal of Glass Science and Technology Part B 66 (2025), S. 63-68
  ISSN: 1753-3562
  DOI: 10.13036/17533562.66.2.10
• Hoffmann P., Wahl L., Funk S., Fey T.:
  From timeless Japanese wood joinery to advanced ceramic joint interlocking
  In: Discover Materials 5 (2025), Art.Nr.: 74
  ISSN: 2730-7727
  DOI: 10.1007/s43939-025-00250-6
• Hossain MI., Monim SA., Moushumy ZM., Khansur NH., Mahmud I., Rahaman M., Aldalbahi A., Firoz SH., Hasnat MA.:
  Synthesis of La2NiMnO6 Double Perovskite as a Highly Selective Electrocatalyst for Oxygen Reduction to Hydrogen Peroxide in Electrochemical Energy Conversion
  In: ACS Applied Energy Materials 8 (2025), S. 949-963
  ISSN: 2574-0962
  DOI: 10.1021/acsaem.4c02469
• Hussain A., Gadelmawla A., Maier J., Eyoum G., Miyazaki H., Kimura K., Hayashi K., Webber KG.:
  Effect of A-site non-stoichiometry in NaNbO3 ceramics
  In: Scripta Materialia 255 (2025), Art.Nr.: 116384
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2024.116384
• Kraft V., Eckstein U., Kuhfuß M., Khansur NH., Marlton FP., Mullens B., Martin A., Hayashi K., Webber KG.:
  Temperature-dependent electromechanical response of BaTi1₋xSnxO3: Analysis of reversible and irreversible contributions
  In: Journal of the American Ceramic Society (2025)
  ISSN: 0002-7820
  DOI: 10.1111/jace.70233
• Kraft V., Spreafico S., Cicconi MR., Kuhfuß M., Mibu K., Kimura K., Hayashi K., Balanov VA., Bai Y., Khansur NH., Meyer B., Webber KG.:
  Influence of tin concentration on the electronic structure and ferroelectric behavior of barium titanate: Experimental and first-principles insights
  In: Journal of Applied Physics 138 (2025), Art.Nr.: 094104
  ISSN: 0021-8979
  DOI: 10.1063/5.0277365
• Kuhfuß M., Eckstein U., Urushihara D., Asaka T., Xie L., Martin A., Kakimoto Ki., Webber KG.:
  Temperature-dependent residual stress in aerosol-deposited barium titanate films
  In: Ceramics International (2025)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2025.08.093
• Løndal NS., Eckstein U., Webber KG., Grande T.:
  Dielectric anomalies in solid solutions of tetragonal tungsten bronze barium sodium niobate‒potassium bismuth niobate
  In: Journal of the American Ceramic Society (2025)
  ISSN: 0002-7820
  DOI: 10.1111/jace.70189
• Nozaki T., Martin A., Webber KG., Nakayama T., Kakimoto Ki.:
  Domain structure and piezoelectric property of Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics polarized by pulse-poling method
  In: Journal of the American Ceramic Society 108 (2025), Art.Nr.: e20705
  ISSN: 0002-7820
  DOI: 10.1111/jace.20705
• Osterloh J., Heltmann-Meyer S., Trossmann VT., Cai A., Kulicke Y., Terörde K., Sörgel C., Lang I., Wajant H., Scheibel T., Fey T., Steiner D., Arkudas A., Horch RE.:
  In Vivo Vascularization of Cell-Supplemented Spider Silk-Based Hydrogels in the Arteriovenous Loop Model
  In: Biomimetics 10 (2025), Art.Nr.: 117
  ISSN: 2313-7673
  DOI: 10.3390/biomimetics10020117
• Pereira L., Schuller S., Donatini A., Wadsworth FB., Neuville DR., Dingwell DB., de Ligny D.:
  Unmixing inducing polymerization of a sodium-molybdenum borosilicate network
  In: Materials Letters 381 (2025), Art.Nr.: 137776
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2024.137776
• Romero AS., Innocentini MD., Vladimir Oliveira J., Lider A., Fey T., Travitzky N., Hotza D.:
  Unveiling the potential of silicon carbide as a support material and membranes for oily wastewater remediation
  In: Separation and Purification Technology 354 (2025), Art.Nr.: 129044
  ISSN: 1383-5866
  DOI: 10.1016/j.seppur.2024.129044
• Tan Z., Lv X., Jiang L., Huang X., Xing J., Xie S., Zhang H., Zhu J.:
  Universal Theoretical Elucidation of Electrobending Deformation in Piezoelectrics
  In: Physical Review Letters 134 (2025), S. 226801-
  ISSN: 0031-9007
  DOI: 10.1103/f9y4-lh2m
• Wahl L., Köllner D., Weichelt M., Travitzky N., Fey T.:
  Environmentally friendly water-based robocasting of complex barium titanate structures
  In: Open Ceramics 22 (2025), Art.Nr.: 100773
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2025.100773
• Weichelt M., Cicconi MR., Klösel I., Funk S., Martin A., Kakimoto Ki., Fey T.:
  Surface Modification of Sol–Gel Synthesized Ba0.85Ca0.15Zr0.1Ti0.9O3 using Stearic Acid Additives
  In: Advanced Engineering Materials (2025)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202500947
• Weichelt M., Wahl L., Travitzky N., Fey T.:
  Co–extrusion of alumina core–shell structures fabricated by robocasting
  In: Open Ceramics 23 (2025), Art.Nr.: 100805
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2025.100805
• Xie L., Cicconi MR., Eckstein U., Xie S., Hussain A., Webber KG.:
  Local variations of the stress-modulated antiferroelectric-ferroelectric phase transitions in polycrystalline NaNbO3 imaged with Raman Spectroscopy
  In: Advanced Functional Materials (2025)
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202512279

2024

• Bagci C., Bastan FE., Nawaz Q., Hurle K., de Ligny D., Boccaccini AR.:
  Effects of silicon nitride (Si3N4) incorporation on physicochemical, bioactivity and antibacterial properties of 45S5 bioactive glass
  In: Ceramics International 50 (2024), S. 50200-50212
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2024.09.367
• Chen D., Ayrikyan A., Chu X., Kamlah M., Webber KG.:
  Creep in 0.91(Na1/2Bi1/2)TiO3-0.06BaTiO3-0.03K0.5Na0.5NbO3 lead-free piezoceramic under constant electric field loads
  In: Journal of Physics D: Applied Physics 57 (2024), Art.Nr.: 065301
  ISSN: 0022-3727
  DOI: 10.1088/1361-6463/ad090e
• Cicconi MR., Deng H., Otsuka T., Mahesh AT., Khansur NH., Hayakawa T., de Ligny D.:
  Photoluminescence Study of Undoped and Eu-Doped Alkali-Niobate Aluminosilicate Glasses and Glass-Ceramics
  In: Materials 17 (2024), S. 2283
  ISSN: 1996-1944
  DOI: 10.3390/ma17102283
• Cicconi MR., Hayakawa T., Dkhil B., Alexe M.:
  Materials for Energy Conversion Systems: Fundamentals, Designs, and Applications
  In: Physica Status Solidi-Rapid Research Letters 18 (2024)
  ISSN: 1862-6254
  DOI: 10.1002/pssr.202400251
• Darwish E., Elia J., Fehn D., Köllner D., Pourjafar A., Christiansen S., Meyer K., Webber KG., Brabec C., Batentschuk M., Osvet A.:
  Brightly Luminescent and Color-Tunable CsPbBr3 Nanocrystals with Enhanced Stability and Room Temperature Cubic Structure through Codoping with MnCl2
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302213
• Dobesh D., Gadelmawla A., Miyazaki H., Hinterstein M., Kimura K., Maier J., Banerjee S., Zeair O., Mehta S., da Silva LL., Khansur NH., Hayashi K., de Ligny D., Webber KG., Cicconi MR.:
  The role of Ca/Zr ratio on the local structure and phase transitions in lead-free (Ba,Ca)(Zr,Ti)O3
  In: Journal of the European Ceramic Society (2024)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2024.03.003
• Eckstein U., Kuhfuß M., Fey T., Webber KG.:
  Feasibility of Powder-Based High-Throughput Synthesis for Ceramics Development: Case Study on the Influence of Calcination Temperature in BiFeO3-BaTiO3
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302126
• Fey T., Hoffmann P., Roland S., Galic S.:
  Use of Plant-Based Pore-Forming Agents in Ceramic Materials
  In: Cfi-Ceramic Forum International 101 (2024), S. E62-E68
  ISSN: 0173-9913
• Grammes T., de Ligny D., Mathew D., Griebenow K., Scheffler F., Lindner F., Aichele C., Dellith J., van Wüllen L., Kamitsos EI., Brauer DS.:
  Dispersion, ionic bonding and vibrational shifts in phospho-aluminosilicate glasses
  In: Physical Chemistry Chemical Physics (2024)
  ISSN: 1463-9076
  DOI: 10.1039/d4cp00685b
• Hoffmann P., Simon S., Zierath B., Fey T.:
  Advanced Hierarchical Biomorphous Silicon Carbide Monoliths
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302227
• Jamshaid S., Cicconi MR., Heiß W., Webber KG., Wellmann P.:
  Synthesis and Characterization of BaZrS3 Thin Films via Stacked Layer Methodology: A Comparative Study of BaZrS3 on Zirconium Foil and Silicon Carbide Substrates
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302161
• Kimura K., Tsutsui S., Yamamoto Y., Nakano A., Kawamura K., Kajimoto R., Kamazawa K., Martin A., Webber KG., Kakimoto K., Hayashi K.:
  Ca-induced phonon softening in BaTiO3 revealed by inelastic x-ray and neutron scattering
  In: Physical Review B 110 (2024), Art.Nr.: 134314
  ISSN: 0163-1829
  DOI: 10.1103/PhysRevB.110.134314
• Kuhfuß M., Maier J., Hall DA., Xie B., Kleppe AK., Martin A., Kakimoto Ki., Khansur NH., Webber KG.:
  In situ electric field-dependent structural changes in (Ba,Ca)(Zr,Ti)O3 with varying grain size
  In: Journal of Applied Physics 135 (2024), Art.Nr.: 174101
  ISSN: 0021-8979
  DOI: 10.1063/5.0203652
• Liu L., Yi J., Tang M., Cui Y., Khansur NH., Webber KG., Zhu F., Li X., Wang K., Rojac T., Daniels J., Damjanovic D., Wang S., Wang Y.:
  Piezoelectric Properties of BiFeO3 Exposed to High Temperatures
  In: Advanced Functional Materials (2024)
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202314807
• Lohbauer U., Fabris DCN., Lubauer J., Abdelmaseh S., Cicconi MR., Hurle K., de Ligny D., Götz-Neunhoeffer F., Belli R.:
  Glass science behind lithium silicate glass-ceramics
  In: Dental Materials (2024)
  ISSN: 0109-5641
  DOI: 10.1016/j.dental.2024.03.006
• Maier J., Fuggerer T., Urushihara D., Martin A., Khansur NH., Kakimoto Ki., Webber KG.:
  The Impact of Grain Growth on the Functional Properties in Room-Temperature Powder Aerosol Deposited Free-Standing (Ba,Ca)(Zr,Ti)O3 Thick Films
  In: Crystals 14 (2024), Art.Nr.: 296
  ISSN: 2073-4352
  DOI: 10.3390/cryst14040296
• Maier J., Kuhfuß M., Urushihara D., Gadelmawla A., Khansur NH., Hall D., Algueró M., Martin A., Kakimoto Ki., Webber KG.:
  Influence of grain size on electromechanical properties of (Ba,Ca)(Zr,Ti)O3: A multiscale analysis using spark plasma sintering and aerosol deposition
  In: Ceramics International 50 (2024), S. 26780-26791
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2024.04.406
• Manière C., Lecourt J., Dermeik B., Schmiedeke S., Travitzky N.:
  Sintering simulations for ceramic multilayer laminates with paper-derived ceramics: From sintering dilatometry to anisotropic sintering simulation
  In: Journal of the European Ceramic Society (2024)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2024.03.031
• Marques LS., Weichelt M., Kuhfuß M., Rambo CR., Fey T.:
  Novel Sol-Gel Synthesis Route for Ce- and V-Doped Ba0.85Ca0.15Ti0.9Zr0.1O3 Piezoceramics
  In: Materials 17 (2024), Art.Nr.: 3228
  ISSN: 1996-1944
  DOI: 10.3390/ma17133228
• Martin A., Kato N., Fey T., Webber KG., Kakimoto Ki.:
  Increased thermal stability by the addition of ZrO2 into a 0.48Ba(Zr0.2Ti0.8)O3-0.52(Ba0.7Ca0.3)TiO3 matrix material
  In: Japanese Journal of Applied Physics 63 (2024), Art.Nr.: 09SP02
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/ad6c58
• Martin A., Khansur NH., Urushihara D., Asaka T., Kakimoto Ki., Webber KG.:
  Effect of Li on the intrinsic and extrinsic contributions of the piezoelectric response in Lix(Na0.5K0.5)1-xNbO3 piezoelectric ceramics across the polymorphic phase boundary
  In: Acta Materialia 266 (2024), Art.Nr.: 119691
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2024.119691
• Martin A., Maier J., Kakimoto Ki., Kamlah M., Webber KG.:
  Observation of the local electromechanical response in 2-2 ceramic-ceramic lead-free ferroelectric composites via digital image correlation
  In: Journal of Applied Physics 135 (2024), Art.Nr.: 044102
  ISSN: 0021-8979
  DOI: 10.1063/5.0184763
• Mo M., Xie L., Chen H., Yang Z., Xing J., Zhu J.:
  Realization of excellent piezoelectricity and high Curie temperature in BF–BT ceramics via structural regulation and domain engineering
  In: Journal of Applied Physics (2024)
  ISSN: 0021-8979
  DOI: 10.1063/5.0229056
• Muniz RF., Guyot Y., Martinet C., de Ligny D., Medina AN., Baesso ML.:
  High pressure-driven effects on the structural and spectroscopic attributes of Eu3+-doped amorphous silicates
  In: Ceramics International (2024)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2023.12.240
• Okafor C., Ding K., Preuß O., Khansur NH., Rheinheimer W., Fang X.:
  Near-surface plastic deformation in polycrystalline SrTiO3 via room-temperature cyclic Brinell indentation
  In: Journal of the American Ceramic Society (2024)
  ISSN: 0002-7820
  DOI: 10.1111/jace.19962
• Otsuka T., Oka R., Cicconi MR., de Ligny D., Hayakawa T.:
  Tuning the luminescence color of Eu3+- and alkali-ion-codoped Sr2CaWO6 orange-red phosphors: Eu3+ site distribution and site-selective photoluminescence studies
  In: APL Materials 12 (2024)
  ISSN: 2166-532X
  DOI: 10.1063/5.0197892
• Simon S., Hoffmann P., Stötzel T., Weber J., Fey T.:
  Keep it Simple: Ceramic Kelvin Cells via Liquid Crystal Display-Stereolithography Printing
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302228
• Stankiewicz G., Dev C., Weichelt M., Fey T., Steinmann P.:
  Towards advanced piezoelectric metamaterial design via combined topology and shape optimization
  In: Structural and Multidisciplinary Optimization (2024)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-024-03742-w
• Stankiewicz G., Dev C., Weichelt M., Fey T., Steinmann P.:
  Towards advanced piezoelectric metamaterial design via combined topology and shape optimization
  In: Structural and Multidisciplinary Optimization 67 (2024), Art.Nr.: 26
  ISSN: 1615-147X
  DOI: 10.1007/s00158-024-03742-w
• Stötzel T., Funk S., Fey T.:
  The sound of porosity: Suitability of the impulse excitation technique (IET) to determine the Young's modulus of 2D macroporous ceramics
  In: Open Ceramics 20 (2024), Art.Nr.: 100686
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2024.100686
• Tsankova S., Nagel O., Bezold A., Grandjean B., Kirchmayer A., Göken M., Neumeier S.:
  Exploring Microstructural Characteristics, Mechanical Behavior, Hydrogen Embrittlement, and Long-Term Stability of Polycrystalline CoNiCr-Based Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_30
• Urushihara D., Kobayashi R., Martin A., Asaka T., Webber KG., Kakimoto Ki.:
  Microscopic evaluation of charged domain wall structure in niobium-based piezoceramics
  In: Applied Physics Letters 125 (2024), Art.Nr.: 192904
  ISSN: 0003-6951
  DOI: 10.1063/5.0228587
• Webber KG., Clemens O., Buscaglia V., Malič B., Bordia RK., Fey T., Eckstein U.:
  Review of the opportunities and limitations for powder-based high-throughput solid-state processing of advanced functional ceramics
  In: Journal of the European Ceramic Society 44 (2024), Art.Nr.: 116780
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2024.116780
• Xie L., Khansur NH., Mo M., Gadelmawla A., Xing J., Tan Z., Zhu J., Webber KG.:
  Decoding the domain dynamics of polycrystalline 0.7BiFeO3-0.3BaTiO3
  In: Journal of Materials Chemistry C (2024)
  ISSN: 2050-7526
  DOI: 10.1039/d4tc01199f
• Xie L., Khansur NH., Mo M., Gadelmawla A., Xing J., Tan Z., Zhu J., Webber KG.:
  Decoding the domain dynamics of polycrystalline 0.7BiFeO3–0.3BaTiO3
  In: Journal of Materials Chemistry C (2024)
  ISSN: 2050-7526
  DOI: 10.1039/D4TC01199F
• Xu Z., Arkudas A., Munawar M., Schubert DW., Fey T., Weisbach V., Mengen L., Horch RE., Cai A.:
  Schwann Cells Do Not Promote Myogenic Differentiation in the EPI Loop Model
  In: Tissue Engineering - Part A 30 (2024), S. 244-256
  ISSN: 1937-335X
  DOI: 10.1089/ten.tea.2023.0215
• Zallmann S., Fu Z., Körner C.:
  Powder sintering kinetics during electron beam based additive manufacturing
  In: Powder Technology 434 (2024), Art.Nr.: 119332
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2023.119332

2023

• Addis LB., Sendekie ZB., Habtu NG., de Ligny D., Roether J., Boccaccini AR.:
  Optimization of process parameters for the synthesis of class F fly ash-based geopolymer binders
  In: Journal of Cleaner Production 415 (2023), Art.Nr.: 137849
  ISSN: 0959-6526
  DOI: 10.1016/j.jclepro.2023.137849
• Avramovska M., Freude D., Schwieger W., Fey T., Kärger J., Haase J.:
  NMR Studies of the Rehydroxylation of Ceramic Materials with Respect to Rehydroxylation Dating
  In: Journal of Physical Chemistry C (2023)
  ISSN: 1932-7447
  DOI: 10.1021/acs.jpcc.3c05189
• Bentzen M., Maier J., Eckstein U., He J., Henss A., Khansur NH., Glaum J.:
  Corrigendum to “Enhanced grain growth and dielectric properties in aerosol deposited BaTiO3” [J. Eur. Ceram. Soc. 43 (2023) 4386–4394, (S0955221923001929), (10.1016/j.jeurceramsoc.2023.03.012)]
  In: Journal of the European Ceramic Society (2023)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2023.08.026
• Bentzen M., Maier J., Eckstein U., He J., Henss A., Khansur NH., Glaum J.:
  Enhanced grain growth and dielectric properties in aerosol deposited BaTiO3
  In: Journal of the European Ceramic Society (2023)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2023.03.012
• Cicconi MR., Dobesh D., Schroeder B., Otsuka T., Hayakawa T., de Ligny D.:
  Alkali-Niobate aluminosilicate glasses: Structure and properties
  In: Optical Materials: X 18 (2023), Art.Nr.: 100228
  ISSN: 2590-1478
  DOI: 10.1016/j.omx.2023.100228
• Ege D., Pourshahrestani S., Iorio F., Reinfelder H., de Ligny D., Boccaccini AR.:
  Processing and characterization of aligned electrospun gelatin/polycaprolactone nanofiber mats incorporating borate glass (13-93B3) microparticles
  In: Biomedical Materials (Bristol) 18 (2023)
  ISSN: 1748-605X
  DOI: 10.1088/1748-605X/acf0ad
• Eyoum G., Eckstein U., Ursic H., Pinto-Salazar M., Buntkowsky G., Groszewicz PB., Checchia S., Hayashi K., Webber KG., Khansur NH.:
  Influence of temperature-induced A-site cation redistribution on the functional properties of A-site complex polar perovskite K1/2Bi1/2TiO3
  In: Journal of Materials Chemistry A (2023)
  ISSN: 2050-7488
  DOI: 10.1039/d3ta00808h
• Eyoum G., Gadelmawla A., Webber KG.:
  Atmosphere and cooling rate effect on the dielectric behavior of the lead-free piezoelectric Bi1/2K1/2TiO3
  In: Ceramics International (2023)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2023.03.002
• Förner A., Vollhüter J., Krapf A., Jamjoom AFA., Hausmann D., Wahlmann B., Fu Z., Körner C., Neumeier S., Göken M.:
  Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202300407
• Gadelmawla A., Spreafico S., Heinemann FW., Urushihara D., Liu D., Li Q., Yan Q., Ceresoli D., Kimura K., Hayashi K., Meyer B., Webber KG.:
  Investigation of ferroelectric Ba1−xCaxZryTi1−yO3 single crystal by in situ temperature-dependent x-ray diffraction and first-principles calculations
  In: Journal of Applied Physics 134 (2023), Art.Nr.: 144104
  ISSN: 0021-8979
  DOI: 10.1063/5.0167348
• Gradaus M., Wahl L., Cicconi MR., de Ligny D., Travitzky N.:
  Coextrusion of Reaction-Bonded Carbides by Robocasting
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202300729
• Hagen S., Haußmann L., Wahlmann B., Gebhardt F., Abu-Khousa B., Weiser M., Neumeier S., Zenk C., Virtanen S.:
  Influence of the W and Ta content on the High-Temperature Oxidation Resistance of Multinary Co/Ni-Based Superalloys at 1050 °C and 1150 °C
  In: High Temperature Corrosion of Materials (2023)
  ISSN: 2731-8397
  DOI: 10.1007/s11085-023-10183-1
• Hebisch M., Klostermeier S., Wolf K., Boccaccini AR., Wolf S., Tanzi RE., Kim DY.:
  The Impact of the Cellular Environment and Aging on Modeling Alzheimer's Disease in 3D Cell Culture Models
  In: Advanced Science (2023)
  ISSN: 2198-3844
  DOI: 10.1002/advs.202205037
• Hoffmann P., Köllner D., Simon S., Kakimoto Ki., Fey T.:
  Modular lead-free piezoceramic/polymer composites with locally adjustable piezoelectric properties
  In: Open Ceramics 13 (2023), Art.Nr.: 100320
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100320
• Karafiludis S., Scoppola E., Wolf S., Kochovski Z., Matzdorff D., Van Driessche AE., Hövelmann J., Emmerling F., Stawski TM.:
  Evidence for liquid-liquid phase separation during the early stages of Mg-struvite formation
  In: Journal of Chemical Physics 159 (2023)
  ISSN: 0021-9606
  DOI: 10.1063/5.0166278
• Karpstein N., Lenz M., Bezold A., Wu M., Neumeier S., Spiecker E.:
  Reliable identification of the complex or superlattice nature of intrinsic and extrinsic stacking faults in the L12 phase by high-resolution imaging
  In: Acta Materialia 260 (2023), Art.Nr.: 119284
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2023.119284
• Kashkarov EB., Krotkevich DG., Abdulmenova AV., Ivashutenko AS., Perevislov SN., Lider AM., Travitzky N.:
  Spark plasma sintering of Nb/Ti3Al(Si)C2-TiC laminated composites
  In: Materialia 27 (2023), Art.Nr.: 101673
  ISSN: 2589-1529
  DOI: 10.1016/j.mtla.2023.101673
• Khurshid B., Lesniewska E., Polacchi L., L'Héronde M., Jackson DJ., Motreuil S., Thomas J., Bardeau JF., Wolf S., Vielzeuf D., Perrin J., Marin F.:
  In situ mapping of biomineral skeletal proteins by molecular recognition imaging with antibody-functionalized AFM tips
  In: Acta Biomaterialia (2023)
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2023.07.028
• Knyazeva A., Travitzky N.:
  MODES OF ADHESIVE BONDING LAYER FORMATION DURING ROLL MOTION IN THE PROCESS OF SHEET LAMINATION
  In: High Temperature Material Processes 27 (2023), S. 67-96
  ISSN: 1093-3611
  DOI: 10.1615/HighTempMatProc.2022044916
• Köllner D., Niedermeyer S., Vermes M., Simon S., Kakimoto Ki., Fey T.:
  Energy-Reduced Fabrication of Light-Frame Ceramic Honeycombs by Replication of Additive Manufactured Templates
  In: Materials 16 (2023), Art.Nr.: 4924
  ISSN: 1996-1944
  DOI: 10.3390/ma16144924
• Lider A., Kudiiarov V., Kurdyumov N., Lyu J., Koptsev M., Travitzky N., Hotza D.:
  Materials and techniques for hydrogen separation from methane-containing gas mixtures
  In: International Journal of Hydrogen Energy (2023)
  ISSN: 0360-3199
  DOI: 10.1016/j.ijhydene.2023.03.345
• Liu X., Liu H., Wu H., Zhou Q., Liang H., Liu G., Duan W., Gu Y., Xu C., Travitzky N., Colombo P., Riedel R.:
  Structural Electromagnetic Absorber Based on MoS2/PyC-Al2O3 Ceramic Metamaterials
  In: Small (2023)
  ISSN: 1613-6829
  DOI: 10.1002/smll.202300664
• Maier J., Gadelmawla A., Khansur NH., Webber KG.:
  Stress-induced tailoring of energy storage properties in lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ferroelectric bulk ceramics
  In: Journal of Materiomics 9 (2023), S. 673-682
  ISSN: 2352-8478
  DOI: 10.1016/j.jmat.2022.12.010
• Martin A., Webber KG., Kakimoto Ki.:
  Influence of Oxygen Vacancies on the Impedance Spectrum of Al2O3-Na0.5K0.5NbO3 Composites
  In: Crystals 13 (2023)
  ISSN: 2073-4352
  DOI: 10.3390/cryst13030463
• Nawaz Q., Fiedler T., Biggemann J., Fey T., Boccaccini AR.:
  Flexural strength of biopolymer coated bioactive glass (45S5) sintered struts for bone tissue engineering applications
  In: Materials Letters 337 (2023), Art.Nr.: 133957
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2023.133957
• Shi X., Bai Y., Wichmann C., Moritz M., Kuhfuß M., Papp C., Khansur NH.:
  Study on Growth of Tungsten Bronze Phase from Niobate Perovskite Ceramics in Controlled Atmosphere for Photoferroelectric Applications
  In: Advanced Electronic Materials (2023)
  ISSN: 2199-160X
  DOI: 10.1002/aelm.202300601
• Shi X., Khansur NH.:
  Tungsten Bronze-Type Ceramics for Temperature-Stable Energy Storage Properties: A Feasibility Study
  In: Crystals 13 (2023), Art.Nr.: 1073
  ISSN: 2073-4352
  DOI: 10.3390/cryst13071073
• Shi X., Khansur NH.:
  Uniaxial stress-dependent dielectric properties and phase transitions of antiferroelectric AgNbO3
  In: Applied Physics Letters 122 (2023), Art.Nr.: 082904
  ISSN: 0003-6951
  DOI: 10.1063/5.0139536
• Simon S., Köllner D., Hoffmann P., Keck E., Spath I., Meyse M., Fey T.:
  Influence of ceramic Kelvin Cell's strut shape on mechanical properties
  In: Open Ceramics 13 (2023), Art.Nr.: 100334
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2023.100334
• Tanaka H., Nozaki T., Martin A., Webber KG., Kakimoto Ki.:
  Stress dependent impedance spectroscopy of niobium based ceramics
  In: Japanese Journal of Applied Physics 62 (2023), Art.Nr.: SM1026
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/acedb8
• Toyoda R., Usui K., Hirota T., Kimura K., Onodera Y., Cicconi MR., Belli R., Brehl M., Lubauer J., Lohbauer U., Tajiri H., Ikeda K., Hayakawa T., de Ligny D., Kohara S., Hayashi K.:
  Atomic structure of ZrO2-doped Li2O–SiO2-based multi-component glasses revealed by molecular dynamics–reverse Monte Carlo modeling
  In: Journal of Non-Crystalline Solids 616 (2023), Art.Nr.: 122472
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2023.122472
• Valdivia P., Zandona A., Kurnosov A., Ballaran TB., Deubener J., Di Genova D.:
  Are volcanic melts less viscous than we thought? The case of Stromboli basalt
  In: Contributions To Mineralogy and Petrology 178 (2023), Art.Nr.: 45
  ISSN: 0010-7999
  DOI: 10.1007/s00410-023-02024-w
• Yang J., Fu Z., Wahl L., Travitzky N., Körner C.:
  Correlation Between Structural Features and Magnetic Performance of Fe93.5Si6.5 (wt.%) Soft Magnetic Materials
  In: Advanced Functional Materials (2023)
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202308194
• Zandonà A., Scarani A., Löschmann J., Cicconi MR., Di Fiore F., de Ligny D., Deubener J., Vona A., Allix M., Di Genova D.:
  Non-stoichiometric crystal nucleation in a spodumene glass containing TiO2 as seed former: Effects on the viscosity of the residual melt
  In: Journal of Non-Crystalline Solids 619 (2023), Art.Nr.: 122563
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2023.122563

2022

• Abdullayev A., Avcioglu C., Fey T., Hilger A., Osenberg M., Manke I., Henning LM., Gurlo A., Bekheet MF.:
  Fabrication and characterization of porous mullite ceramics derived from fluoride-assisted Metakaolin-Al(OH)3 annealing for filtration applications
  In: Open Ceramics 9 (2022), Art.Nr.: 100240
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100240
• Agti FZ., Soltani MT., Santos LF., Messaoudi A., Guesmia N., de Ligny D.:
  Physical, mechanical properties and optical dispersion in Sb2O3–-NaPO3-WO3 glasses
  In: Journal of Non-Crystalline Solids 576 (2022), Art.Nr.: 121249
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2021.121249
• Andrade LH., Lima SM., Silva RA., Devecchi MR., Moraes JC., de Ligny D., Nunes LA.:
  Eu3+-doped lithium tellurite glasses prepared under vacuum condition: Spectroscopic investigation and energy transfer mechanism
  In: Journal of Luminescence 246 (2022), Art.Nr.: 118812
  ISSN: 0022-2313
  DOI: 10.1016/j.jlumin.2022.118812
• Bai Y., Prucker C., Khansur NH.:
  Growth of tungsten bronze phase out of niobate perovskite phase for opto-ferroelectric applications
  In: Journal of the American Ceramic Society (2022)
  ISSN: 0002-7820
  DOI: 10.1111/jace.18300
• Bezold A., Freund L., Förner A., Völkl J., Huber LK., Göken M., Neumeier S.:
  Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06912-x
• Cai A., Zheng Z., Müller-Seubert W., Biggemann J., Fey T., Beier JP., Horch RE., Friess B., Arkudas A.:
  Microsurgical Transplantation of Pedicled Muscles in an Isolation Chamber-A Novel Approach to Engineering Muscle Constructs via Perfusion-Decellularization
  In: Journal of Personalized Medicine 12 (2022)
  ISSN: 2075-4426
  DOI: 10.3390/jpm12030442
• Chen HJ., Yeh CH., Kuo TW., Kakarla DC., Wu HC., Yen TW., Huang SM., Chou H., Chou MC., Chen HW., Kuo SW., Chuang YC., Chang CK., Eckstein U., Khansur NH., Webber KG., Yang HD.:
  Unique multiferroics with tunable ferroelastic transition in antiferromagnet Mn2V2O7
  In: Materials Today Physics 23 (2022)
  ISSN: 2542-5293
  DOI: 10.1016/j.mtphys.2022.100623
• Cicconi MR., Belli R., Brehl M., Lubauer J., Hayakawa T., Kimura K., Hirota T., Usui K., Kohara S., Onodera Y., Lohbauer U., Hayashi K., de Ligny D.:
  Nucleation mechanisms in a SiO2-Li2O-P2O5-ZrO2 biomedical glass-ceramic: Insights on crystallisation, residual glasses and Zr4+ structural environment
  In: Journal of the European Ceramic Society 42 (2022), S. 1762-1775
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2021.12.009
• Cifuentes SC., Alvarez L., Arias L., Fey T., Tsipas SA.:
  Strategies to Control In Vitro Degradation of Mg Scaffolds Processed by Powder Metallurgy
  In: Metals 12 (2022), Art.Nr.: 566
  ISSN: 2075-4701
  DOI: 10.3390/met12040566
• Clark SM., Colas B., Jacob DE., Neuefeind JC., Wang HW., Page KL., Soper AK., Schodder P., Duchstein P., Apeleo Zubiri B., Yokosawa T., Pipich V., Zahn D., Spiecker E., Wolf S.:
  The nano- and meso-scale structure of amorphous calcium carbonate
  In: Scientific Reports 12 (2022)
  ISSN: 2045-2322
  DOI: 10.1038/s41598-022-10627-9
• Diepold B., Schunk C., Kümmel F., Fey T., Prakash A., Höppel HW., Göken M.:
  Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101143
• Dietemann B., Wahl L., Travitzky N., Kruggel-Emden H., Kraft T., Bierwisch C.:
  Reorientation of Suspended Ceramic Particles in Robocasted Green Filaments during Drying
  In: Materials 15 (2022), Art.Nr.: 2100
  ISSN: 1996-1944
  DOI: 10.3390/ma15062100
• Duchstein P., Schodder P., Leupold S., Dao TQN., Kababya S., Cicconi MR., de Ligny D., Pipich V., Eike D., Schmidt A., Zahn D., Wolf S.:
  Small-Molecular-Weight Additives Modulate Calcification by Interacting with Prenucleation Clusters on the Molecular Level
  In: Angewandte Chemie International Edition (2022)
  ISSN: 1433-7851
  DOI: 10.1002/anie.202208475
• Eckstein U., Exner J., Bencan Golob A., Ziberna K., Drazic G., Ursic H., Wittkämper H., Papp C., Kita J., Moos R., Webber KG., Khansur NH.:
  Temperature-dependent dielectric anomalies in powder aerosol deposited ferroelectric ceramic films
  In: Journal of Materiomics 8 (2022), S. 1239-1250
  ISSN: 2352-8478
  DOI: 10.1016/j.jmat.2022.05.001
• Eckstein U., Khansur NH., Bergler M., Urushihara D., Asaka T., Kakimoto KI., Sadl M., Dragomir M., Ursic H., de Ligny D., Webber KG.:
  Room temperature deposition of freestanding BaTiO3 films: temperature-induced irreversible structural and chemical relaxation
  In: Journal of Materials Science (2022)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-022-07467-3
• Eckstein U., Khansur NH., Urushihara D., Asaka T., Kakimoto Ki., Fey T., Webber KG.:
  Defect modulated dielectric properties in powder aerosol deposited ceramic thick films
  In: Ceramics International 48 (2022), S. 33082-33091
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2022.07.241
• Eichhorn F., Bytomski J., Gerauer M., Kakimoto Ki., Fey T.:
  Improved Mechanical Amplification of Monolithic PZT and PZT Composite via Optimized Honeycomb Macrostructures
  In: Materials 15 (2022), Art.Nr.: 7893
  ISSN: 1996-1944
  DOI: 10.3390/ma15227893
• Eichhorn F., Schiegerl H., Köllner D., Kakimoto KI., Fey T.:
  Stress and Deformation Behavior of 2D Composite Cellular Actuator Structures of Ceramic Building Blocks and Epoxy Resins
  In: physica status solidi (b) (2022)
  ISSN: 0370-1972
  DOI: 10.1002/pssb.202100591
• Evaristo L., Silveira R., Tissot M., Hippler G., Moulton B., Buchner S.:
  Effect of high pressure in barium disilicate glass investigated by DTA and Raman spectroscopy
  In: International Journal of Applied Glass Science (2022)
  ISSN: 2041-1286
  DOI: 10.1111/ijag.16606
• Eyoum G., Eckstein U., Rieß K., Gadelmawla A., Springer E., Webber KG., Khansur NH.:
  Sintering condition-dependent electromechanical behavior of the lead-free piezoelectric Bi1/2K1/2TiO3
  In: Journal of Materials Science (2022)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-022-07630-w
• Fey T., Simon U., Fukushima M., Smith DS.:
  Editorial - Porous ceramics
  In: Open Ceramics 10 (2022), Art.Nr.: 100273
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100273
• Freund T., Cicconi MR., Wellmann P.:
  Fabrication of Bariumtrisulphide Thin Films as Precursors for Chalcogenide Perovskites
  In: physica status solidi (b) (2022)
  ISSN: 0370-1972
  DOI: 10.1002/pssb.202200094
• Fu Z., Körner C.:
  Actual state-of-the-art of electron beam powder bed fusion
  In: European Journal of Materials 2 (2022), S. 54-116
  ISSN: 2688-9277
  DOI: 10.1080/26889277.2022.2040342
• Gadelmawla A., Dobesh D., Eckstein U., Grübl O., Ehmke M., Cicconi MR., Khansur NH., de Ligny D., Webber KG.:
  Influence of stress on the electromechanical properties and the phase transitions of lead-free (1-x)Ba(Zr0.2Ti0.8)O-3-x(Ba0.7Ca0.3)TiO3
  In: Journal of Materials Science (2022)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-022-07685-9
• Gadelmawla A., Eckstein U., Rieß K., Liu YX., Wang K., Li JF., Kakimoto KI., Khansur NH., Webber KG.:
  Temperature- and stress-dependent electromechanical properties of phase-boundary-engineered KNN-based piezoceramics
  In: Journal of the American Ceramic Society (2022)
  ISSN: 0002-7820
  DOI: 10.1111/jace.18917
• Gadelmawla A., Spreafico S., Heinemann FW., Liu D., Li Q., Yan Q., Hayashi K., Meyer B., Webber KG.:
  In situ temperature-dependent X-ray diffraction study of ferroelectric single crystal BCZT
  In: Acta Crystallographica Section A : Foundations and Advances 78 (2022), S. e461-e461
  ISSN: 0108-7673
  DOI: 10.1107/S205327332209283X
• Grammes T., de Ligny D., Scheffler F., Nizamutdinova A., Wu''Llen LV., Kamitsos EI., Massera J., Brauer DS.:
  Influence of Phosphate on Network Connectivity and Glass Transition in Highly Polymerized Aluminosilicate Glasses
  In: Journal of Physical Chemistry B 126 (2022), S. 9911-9926
  ISSN: 1520-6106
  DOI: 10.1021/acs.jpcb.2c06530
• Greil P., Cordelair J., Bezold A.:
  Discrete Element Simulation of Ceramic Powder Processing
  In: International Journal of Materials Research 92 (2022), S. 682-689
  ISSN: 1862-5282
  DOI: 10.1515/ijmr-2001-0130
• Guesmia N., Hamzaoui M., Beghdadi L., Soltani MT., de Ligny D.:
  Glass formation, physical and structural investigation studies of the (90-x) Sb2O3-10WO(3)-xNaPO(3) glasses
  In: Materials Today Communications 30 (2022)
  ISSN: 2352-4928
  DOI: 10.1016/j.mtcomm.2022.103226
• Hussain A., Maqbool A., Malik RA., Ahmed T., Lee S., Kim MH.:
  Texture performance of lead-free Bi1/2Na1/2TiO3–BaZrO3 ceramics
  In: Ceramics International (2022)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2022.11.188
• Kashkarov E., Krotkevich D., Koptsev M., Ognev S., Svyatkin L., Travitzky N., Lider A.:
  Microstructure and Hydrogen Permeability of Nb-Ni-Ti-Zr-Co High Entropy Alloys
  In: Membranes 12 (2022)
  ISSN: 2077-0375
  DOI: 10.3390/membranes12111157
• Kashkarov EB., Krotkevich DG., Mingazova YR., Pushilina NS., Syrtanov MS., Lider AM., Travitzky N.:
  Functionally graded laminated composites fabricated from MAX-phase filled preceramic papers: Microstructure, mechanical properties and oxidation resistance
  In: Journal of the European Ceramic Society (2022)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2022.01.023
• Köllner D., Biggemann J., Simon S., Hoffmann P., Kakimoto Ki., Fey T.:
  Additive manufactured replica foams
  In: Open Ceramics 10 (2022), Art.Nr.: 100258
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2022.100258
• Köllner D., Simon S., Niedermeyer S., Spath I., Wolf E., Kakimoto KI., Fey T.:
  Relation between Structure, Mechanical and Piezoelectric Properties in Cellular Ceramic Auxetic and Honeycomb Structures
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201387
• Köllner D., Tolve-Granier B., Simon S., Kakimoto Ki., Fey T.:
  Advanced Estimation of Compressive Strength and Fracture Behavior in Ceramic Honeycombs by Polarimetry Measurements of Similar Epoxy Resin Honeycombs
  In: Materials 15 (2022), Art.Nr.: 2361
  ISSN: 1996-1944
  DOI: 10.3390/ma15072361
• Li H., Xie L., Tan Z., Xing J., Li X., Chen H., Wang F., Cheng Y., Tang M., Zhu J.:
  Utilization of Nonstoichiometric Nb5+ to Optimize Comprehensive Electrical Properties of KNN-Based Ceramics
  In: Inorganic Chemistry (2022)
  ISSN: 0020-1669
  DOI: 10.1021/acs.inorgchem.2c03160
  URL: https://pubs.acs.org/doi/full/10.1021/acs.inorgchem.2c03160
• Luo N., Huber F., Ciftci N., Wahl L., Bezold A., Neumeier S., Uhlenwinkel V., Travitzky N., Schmidt M., Zenk C., Körner C.:
  Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022), Art.Nr.: 143405
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143405
• Martin A., Brehl M., Khansur NH., Werr F., de Ligny D., Webber KG.:
  Brillouin spectroscopy study of the stress-induced ferroelectric order in lead-free relaxor 0.93(Na1/2Bi1/2)TiO3-0.07BaTiO3 ceramics
  In: Acta Materialia 238 (2022), Art.Nr.: 118218
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.118218
• Martin A., Brehl M., Khansur NH., Werr F., de Ligny D., Webber KG.:
  Brillouin spectroscopy study of the stress-induced ferroelectric order in lead-free relaxor 0.93(Na1/2Bi1/2)TiO3-0.07BaTiO3 ceramics
  In: Acta Materialia 238 (2022), S. 118218
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.118218
• Martin A., Maier J., Streich F., Kamlah M., Webber KG.:
  Investigating the importance of strain-coupling in lead-free 2-2 relaxor/ferroelectric composites with digital image correlation
  In: Smart Materials & Structures 31 (2022)
  ISSN: 0964-1726
  DOI: 10.1088/1361-665X/ac6fa0
• Martin A., Webber KG., Kakimoto KI.:
  Mechanical and electrical properties of Na0.55K0.45NbO3+0.2% MnO/Al2O3 composites for energy harvesting applications
  In: Japanese Journal of Applied Physics 61 (2022)
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/ac85f7
• Otsuka T., Cicconi MR., Dobesh D., Schroeder B., Hayakawa T.:
  93Nb NMR Study of (K, Na)NbO3-Doped SiO2–Na2O–Al2O3 Glasses
  In: physica status solidi (b) (2022)
  ISSN: 0370-1972
  DOI: 10.1002/pssb.202200016
• Popov V., Fleisher A., Muller‑Kamskii G., Avraham S., Shishkin A., Katz‑Demyanetz A., Travitzky N., Yacobi Y., Goel S.:
  Author Correction: Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting (Scientific Reports, (2021), 11, 1, (2438), 10.1038/s41598-021-81861-w)
  In: Scientific Reports 12 (2022), Art.Nr.: 1644
  ISSN: 2045-2322
  DOI: 10.1038/s41598-022-05818-3
• Sadl M., Nadaud K., Bah M., Levassort F., Eckstein U., Khansur NH., Webber KG., Ursic H.:
  Multifunctional energy storage and piezoelectric properties of 0.65Pb(Mg1/3Nb2/3)O3-0.35PbTiO3thick films on stainless-steel substrates
  In: JPhys Energy 4 (2022), Art.Nr.: 024004
  ISSN: 2515-7655
  DOI: 10.1088/2515-7655/ac5fd5
• Scheffler M., Fey T.:
  CELLMAT 2020
  In: Advanced Engineering Materials 24 (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101618
• Shi X., Eckstein U., Lang S., Cicconi MR., Khansur NH.:
  Temperature-dependent ferroelastic behaviour of antiferroelectric AgNbO3
  In: Acta Materialia 232 (2022)
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117931
• Shi X., Eckstein U., Li Y., Hall D., Khansur NH.:
  Spatially-resolved relaxor to ferroelectric phase switching in 0.93Na1/2Bi1/2TiO3-0.07BaTiO3 ceramics
  In: Journal of Materiomics (2022)
  ISSN: 2352-8478
  DOI: 10.1016/j.jmat.2022.03.005
• Trinh TTH., Nguyen TKP., Khuu CQ., Wolf S., Nguyen AT.:
  Influence of Taylor Vortex Flow on the Crystallization of L-Glutamic Acid as an Organic Model Compound
  In: Industrial & Engineering Chemistry Research (2022)
  ISSN: 0888-5885
  DOI: 10.1021/acs.iecr.2c01505
• Wahl L., Cicconi MR., Weichelt M., de Ligny D., Travitzky N.:
  Residual-stress-induced crack formation in robocasted multi-material ceramics: Stress considerations and crack prevention
  In: Journal of the European Ceramic Society (2022)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2022.10.006
• Wahl L., Maier J., Schmiedeke S., The-An Pham ., Fey T., Webber KG., Travitzky N., Khansur NH.:
  Electromechanical properties of paper-derived potassium sodium niobate piezoelectric ceramics
  In: Journal of the American Ceramic Society (2022)
  ISSN: 0002-7820
  DOI: 10.1111/jace.18655
• Wahl L., Schmiedeke S., Knorr M., Schneider I., Travitzky N.:
  Fabrication of Reaction-Bonded Boron Carbide-Based Composites by Binder Jetting 3D Printing
  In: Ceramics 5 (2022), S. 1167-1173
  ISSN: 2571-6131
  DOI: 10.3390/ceramics5040082
• Wallis D., Harris J., Böhm C., Wang D., Zavattieri P., Feldner P., Merle B., Pipich V., Hurle K., Leupold S., Hansen LN., Marin F., Wolf S.:
  Erratum: Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics (Mater. Adv. (2022) DOI: 10.1039/d1ma01031j)
  In: Materials Advances 3 (2022), S. 2598-
  ISSN: 2633-5409
  DOI: 10.1039/d2ma90020c
• Werr F., Eppelt U., Muellers L., de Ligny D.:
  Ultra-Short-Pulse Laser Filaments for Float Glass Cutting: Influence of Laser Parameters on Micro Cracks Formation
  In: Frontiers in Physics 10 (2022), Art.Nr.: 862419
  ISSN: 2296-424X
  DOI: 10.3389/fphy.2022.862419
• Xie L., Chen H., Xie Y., Tan Z., Cheng Y., Chen Q., Xing J., Zhu J.:
  The roles of Sn4+ in affecting performance of Potassium Sodium Niobate ceramics
  In: Journal of Alloys and Compounds (2022)
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2021.163290
  URL: https://www.sciencedirect.com/science/article/pii/S0925838821047009
• Xie L., Mo M., Chen H., Xie Y., Cheng Y., Shu C., Chen Q., Xing J., Tan Z., Zhu J., Zhu H.:
  Controlling the domain size to enhance the piezoelectricity of BiFeO 3–BaTiO 3 via heterovalent doping
  In: Journal of Materials Chemistry A (2022)
  ISSN: 2050-7488
  DOI: 10.1039/D2TA06546K
  URL: https://pubs.rsc.org/en/content/articlehtml/2001/vy/d2ta06546k
• Yamamoto Y., Kawamura K., Sugimoto H., Gadelmawla A., Kimura K., Happo N., Tajiri H., Webber KG., Kakimoto K., Hayashi K.:
  Significant displacement of calcium and barium ions in ferroelectric (Ba0.9Ca0.1)TiO3 revealed by x-ray fluorescence holography
  In: Applied Physics Letters 120 (2022)
  ISSN: 0003-6951
  DOI: 10.1063/5.0076325
• Yamamoto Y., Kimura K., Gadelmawla A., Kawamura K., Sugimoto H., Liu D., Li Q., Yan Q., Khansur NH., Happo N., Kakimoto KI., Webber KG., Hayashi K.:
  Local Structural Investigation of (Ba,Ca)(Zr,Ti)O3 and Ca(Zr,Ti)O3 by X-Ray Fluorescence Holography
  In: physica status solidi (b) (2022)
  ISSN: 0370-1972
  DOI: 10.1002/pssb.202100609
• Zhuo F., Eckstein U., Khansur NH., Dietz C., Urushihara D., Asaka T., Kakimoto KI., Webber KG., Fang X., Roedel J.:
  Temperature-induced changes of the electrical and mechanical properties of aerosol-deposited BaTiO3 thick films for energy storage applications
  In: Journal of the American Ceramic Society (2022)
  ISSN: 0002-7820
  DOI: 10.1111/jace.18377

2021

• Bergler M., Cvecek K., Werr F., Veber A., Schreiner J., Eckstein U., Webber KG., Schmidt M., de Ligny D.:
  Coupling raman, brillouin and nd3+ photo luminescence spectroscopy to distinguish the effect of uniaxial stress from cooling rate on soda-lime silicate glass
  In: Materials 14 (2021), Art.Nr.: 3584
  ISSN: 1996-1944
  DOI: 10.3390/ma14133584
• Bernardo E., Elsayed H., Romero AR., Crovace MC., Zanotto ED., Fey T.:
  Biosilicate® Glass-Ceramic Foams From Refined Alkali Activation and Gel Casting
  In: Frontiers in Materials 7 (2021), Art.Nr.: 588789
  ISSN: 2296-8016
  DOI: 10.3389/fmats.2020.588789
• Biggemann J., Köllner D., Schatz J., Stumpf M., Fey T.:
  Influence of µCT scanning resolution and volume on FEM-simulation of periodic 3D-printed porous ceramics
  In: Materials Letters 303 (2021), Art.Nr.: 130529
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2021.130529
• Biggemann J., Köllner D., Simon S., Heik P., Hoffmann P., Fey T.:
  Porous Functional Graded Bioceramics with Integrated Interface Textures
  In: Ceramics 4 (2021), S. 681-695
  ISSN: 2571-6131
  DOI: 10.3390/ceramics4040048
• Biggemann J., Stumpf M., Fey T.:
  Porous Alumina Ceramics with Multimodal Pore Size Distributions
  In: Materials 14 (2021), S. 3294
  ISSN: 1996-1944
  DOI: 10.3390/ma14123294
• Bisbrouck N., Bertani M., Angeli F., Charpentier T., de Ligny D., Delaye JM., Gin S., Micoulaut M.:
  Impact of magnesium on the structure of aluminoborosilicate glasses: A solid-state NMR and Raman spectroscopy study
  In: Journal of the American Ceramic Society (2021)
  ISSN: 0002-7820
  DOI: 10.1111/jace.17876
• Cao C., Lin Z., Liu X., Jia Y., Saiz E., Wolf S., Wagner HD., Jiang L., Cheng Q.:
  Strong Reduced Graphene Oxide Coated Bombyx mori Silk
  In: Advanced Functional Materials (2021)
  ISSN: 1616-301X
  DOI: 10.1002/adfm.202102923
• Cao C., Peng J., Liang X., Saiz E., Wolf S., Wagner HD., Jiang L., Cheng Q.:
  Strong, conductive aramid fiber functionalized by graphene
  In: Composites Part A-Applied Science and Manufacturing 140 (2021), Art.Nr.: 106161
  ISSN: 1359-835X
  DOI: 10.1016/j.compositesa.2020.106161
• Cicconi MR., Le Losq C., Henderson GS., Neuville DR.:
  The redox behavior of rare earth elements
  In: Roberto Moretti, Daniel R. Neuville (Hrsg.): Magma Redox Geochemistry, Wiley Blackwell, 2021
  ISBN: 9781119473206
  DOI: 10.1002/9781119473206.ch19
• Cicconi MR., Veber A., Neuville DR., Baudelet F., de Ligny D.:
  Cerium speciation in silicate glasses: Structure-property relationships
  In: Journal of Non-Crystalline Solids 563 (2021), Art.Nr.: 120785
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2021.120785
• Dammler K., Schelm K., Betke U., Fey T., Scheffler M.:
  Open-Cellular Alumina Foams with Hierarchical Strut Porosity by Ice Templating: A Thickening Agent Study
  In: Materials 14 (2021)
  ISSN: 1996-1944
  DOI: 10.3390/ma14051060
• Dietemann B., Bosna F., Lorenz MM., Travitzky N., Kruggel-Emden H., Kraft T., Bierwisch C.:
  Numerical study of texture in material extrusion: Orientation in a multicomponent system of spheres and ellipsoids
  In: Journal of Non-Newtonian Fluid Mechanics 291 (2021), Art.Nr.: 104532
  ISSN: 0377-0257
  DOI: 10.1016/j.jnnfm.2021.104532
• Eichhorn F., Keppner F., Köllner D., Fey T.:
  Deformation Behavior of 2D Composite Cellular Lattices of Ceramic Building Blocks and Epoxy Resin
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100536
• Fey T.:
  Determination of the representative volume-of-interest (REVOI) in ceramic replica foams
  In: Open Ceramics 7 (2021), Art.Nr.: 100154
  ISSN: 2666-5395
  DOI: 10.1016/j.oceram.2021.100154
• Gadelmawla A., Rieß K., Birkenstock J., Hinterstein M., Webber KG., Khansur NH.:
  Effect of varying Bi content on the temperature-dependent mechanical, dielectric, and structural properties of nominal Na1/2Bi1/2TiO3
  In: Journal of Applied Physics 130 (2021), Art.Nr.: 185106
  ISSN: 0021-8979
  DOI: 10.1063/5.0070594
• Gadelmawla A., Rieß K., Hinterstein M., Webber KG., Khansur NH.:
  Effect of Bi non-stoichiometry on the crystallographic structure of Na1/2Bi1/2TiO3
  In: ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, CHESTER: 2021
• Griseri M., Biggemann J., Ramos JP., Li G., Dams O., Popescu L., Vleugels J., Fey T., Lambrinou K.:
  Porous TaCx ISOL target materials from mould-casted Ta4AlC3
  In: Journal of the European Ceramic Society (2021)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2021.02.022
• Hubert F., Bader T., Wahl L., Hofmann A., Lomakin K., Sippel M., Travitzky N., Gold G.:
  Additive Manufactured Waveguide for E-Band Using Ceramic Materials
  In: Applied Sciences 12 (2021), Art.Nr.: 212
  ISSN: 2076-3417
  DOI: 10.3390/app12010212
  URL: https://www.mdpi.com/2076-3417/12/1/212
• Kashkarov EB., Pushilina NS., Syrtanov MS., Krotkevich DG., Gotman I., Travitzky N.:
  Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering
  In: Scripta Materialia 194 (2021), Art.Nr.: 113696
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2020.113696
• Khansur NH., Eckstein U., Bergler M., Martin A., Wang K., Li JF., Cicconi MR., Hatano K., Kakimoto KI., de Ligny D., Webber KG.:
  In situ combined stress- and temperature-dependent Raman spectroscopy of Li-doped (Na,K)NbO3
  In: Journal of the American Ceramic Society (2021)
  ISSN: 0002-7820
  DOI: 10.1111/jace.18269
• Khansur NH., Eckstein U., Ursic H., Sadl M., Brehl M., Martin A., Rieß K., de Ligny D., Webber KG.:
  Enhanced Electromechanical Response and Thermal Stability of 0.93(Na1/2Bi1/2)TiO3-0.07BaTiO3 Through Aerosol Deposition of Base Metal Electrodes
  In: Advanced Materials Interfaces (2021)
  ISSN: 2196-7350
  DOI: 10.1002/admi.202100309
• Klang K., Nickel KG.:
  The plant-like structure of lance sea urchin spines as biomimetic concept generator for freeze-casted structural graded ceramics
  In: Biomimetics 6 (2021), Art.Nr.: 36
  ISSN: 2313-7673
  DOI: 10.3390/biomimetics6020036
• Krinitcyn M., Ragulina M., Firsina I., Travitzky N.:
  Influence of selective laser treatment on thermal stability of Ti3AlC2 and Ti3AlC2/Cu powders
  In: Materials Letters (2021), Art.Nr.: 131354
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2021.131354
• Krotkevich DG., Kashkarov EB., Syrtanov MS., Murashkina TL., Lider AM., Schmiedeke S., Travitzky N.:
  Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering
  In: Ceramics International (2021)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2021.01.070
• Li K., Kashkarov E., Ma H., Fan P., Zhang Q., Zhang P., Zhang J., Wu Z., Wahl L., Laptev R., Lider A., Travitzky N., Yuan D.:
  Microstructural analysis of novel preceramic paper-derived sicf /sic composites
  In: Materials 14 (2021), Art.Nr.: 6737
  ISSN: 1996-1944
  DOI: 10.3390/ma14226737
• Lorenz MM., Travitzky N., Rambo CR.:
  Effect of processing parameters on in situ screen printing-assisted synthesis and electrical properties of Ti3SiC2-based structures
  In: Journal of Advanced Ceramics 10 (2021), S. 129-138
  ISSN: 2227-8508
  DOI: 10.1007/s40145-020-0427-0
• Lubauer J., Belli R., Petschelt A., Cicconi MR., Hurle K., Lohbauer U.:
  Concurrent kinetics of crystallization and toughening in multicomponent biomedical SiO2-Li2O-P2O5-ZrO2 glass-ceramics
  In: Journal of Non-Crystalline Solids 554 (2021), Art.Nr.: 120607
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2020.120607
• Lubauer J., Hurle K., Cicconi MR., Petschelt A., Peterlik H., Lohbauer U., Belli R.:
  Toughening by revitrification of Li2SiO3 crystals in Obsidian® dental glass-ceramic
  In: Journal of the Mechanical Behavior of Biomedical Materials 124 (2021), Art.Nr.: 104739
  ISSN: 1751-6161
  DOI: 10.1016/j.jmbbm.2021.104739
• Nishiyama H., Martin A., Hatano K., Kishimoto S., Sasaki N., Webber KG., Kakimoto Ki.:
  Alkali volatilization of (Li,Na,K)NbO3-based piezoceramics and large-field electrical and mechanical properties
  In: Journal of the Ceramic Society of Japan 129 (2021), S. 127-134
  ISSN: 1882-0743
  DOI: 10.2109/jcersj2.20201
• Otsuka T., Brehl M., Cicconi MR., de Ligny D., Hayakawa T.:
  Thermal Evolutions to Glass-Ceramics Bearing Calcium Tungstate Crystals in Borate Glasses Doped with Photoluminescent Eu3+ Ions
  In: Materials 14 (2021)
  ISSN: 1996-1944
  DOI: 10.3390/ma14040952
• Popov V., Fleisher A., Muller-Kamskii G., Shishkin A., Katz-Demyanetz A., Travitzky N., Goel S.:
  Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting
  In: Scientific Reports 11 (2021), Art.Nr.: 2438
  ISSN: 2045-2322
  DOI: 10.1038/s41598-021-81861-w
• Porde A., Roßbach A., Ferstl P., Gillig S., Werr F., de Ligny D., Wierschem A.:
  Melting Curves of Triolein Polymorphs
  In: Journal of the American Oil Chemists Society 98 (2021), S. 211-219
  ISSN: 0003-021X
  DOI: 10.1002/aocs.12428
• Rambo CR., Travitzky N.:
  Hybrid processing of TiC/TiCu/C composites with tailored hardness
  In: Journal of Composite Materials (2021)
  ISSN: 0021-9983
  DOI: 10.1177/00219983211038751
• Rieß K., Khansur NH., Martin A., Benčan A., Uršič H., Webber KG.:
  Stress- And frequency-dependent properties of relaxor-like sodium bismuth titanate
  In: Physical Review B 103 (2021), Art.Nr.: 094113
  ISSN: 0163-1829
  DOI: 10.1103/PhysRevB.103.094113
• Rottensteiner-Brandl U., Bertram U., Lingens L., Köhn K., Distel L., Fey T., Körner C., Horch RE., Arkudas A.:
  Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats
  In: Cells 10 (2021)
  ISSN: 2073-4409
  DOI: 10.3390/cells10092256
• Sadl M., Condurache O., Bencan A., Dragomir M., Prah U., Malic B., Deluca M., Eckstein U., Hausmann D., Khansur NH., Webber KG., Ursic H.:
  Energy-storage-efficient 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 thick films integrated directly onto stainless steel
  In: Acta Materialia 221 (2021), Art.Nr.: 117403
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117403
• Shi X., Kumar N., Jones J., Hoffman M.:
  Fracture and electric‐field‐induced crack growth behavior in NBT‐6BT relaxor ferroelectrics
  In: Journal of the American Ceramic Society (2021)
  ISSN: 0002-7820
• Steiner D., Winkler S., Heltmann-Meyer S., Trossmann VT., Fey T., Scheibel T., Horch RE., Arkudas A.:
  Enhanced vascularization and de novo tissue formation in hydrogels made of engineered RGD-tagged spider silk proteins in the arteriovenous loop model
  In: Biofabrication 13 (2021)
  ISSN: 1758-5082
  DOI: 10.1088/1758-5090/ac0d9b
• Streich FA., Martin A., Webber KG., Kamlah M.:
  Macroscopic constitutive model for ergodic and non-ergodic lead-free relaxors
  In: Journal of Intelligent Material Systems and Structures (2021)
  ISSN: 1045-389X
  DOI: 10.1177/1045389X211038680
• Sugimoto H., Biggemann J., Fey T., Singh P., Khare D., Dubey AK., Kakimoto Ki.:
  Lead-free piezoelectric (Ba,Ca)(Ti,Zr)O3 scaffolds for enhanced antibacterial property
  In: Materials Letters 297 (2021), Art.Nr.: 129969
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2021.129969
• Syrtanov M., Kashkarov E., Murashkina T., Travitzky N.:
  Spark plasma sintering of paper-derived Ti3AlC2-based composites: Influence of sintering temperature
  International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, THERMEC 2021 (Vienna, AUT, 10. Mai 2021 - 14. Mai 2021)
  In: Mihail Ionescu, Christof Sommitsch, Cecilia Poletti, Ernst Kozeschnik, Tara Chandra (Hrsg.): Materials Science Forum 2021
  DOI: 10.4028/www.scientific.net/MSF.1016.1790
• These A., Khansur NH., Almora O., Luer L., Matt G., Eckstein U., Barabash A., Osvet A., Webber KG., Brabec C.:
  Characterization of Aerosol Deposited Cesium Lead Tribromide Perovskite Films on Interdigited ITO Electrodes
  In: Advanced Electronic Materials (2021)
  ISSN: 2199-160X
  DOI: 10.1002/aelm.202001165
• Trinh H., Schodder P., Demmert B., Nguyen AT.:
  Crystallization of L-glutamic acid under microfluidic conditions and levitation
  In: Chemical Engineering Research & Design 169 (2021), S. 176-188
  ISSN: 0263-8762
  DOI: 10.1016/j.cherd.2021.03.013
• Wahl L., Weichelt M., Goik P., Schmiedeke S., Travitzky N.:
  Robocasting of reaction bonded silicon carbide/silicon carbide platelet composites
  In: Ceramics International 47 (2021), S. 9736-9744
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2020.12.113
• Wahl L., Weichelt M., Travitzky N.:
  Multi-material printing of reaction bonded carbides by robocasting
  In: Additive Manufacturing 48 (2021)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2021.102427
• Wallis D., Harris J., Böhm C., Wang D., Zavattieri P., Feldner P., Merle B., Pipich V., Hurle K., Leupold S., Hansen LN., Marin F., Wolf S.:
  Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics
  In: Materials Advances (2021)
  ISSN: 2633-5409
  DOI: 10.1039/d1ma01031j
• Werr F., Yusim W., Bergler M., Shcheka S., Lenhart A., de Ligny D.:
  Utilizing rare-earth-elements luminescence and vibrational-spectroscopies to follow high pressure densification of soda–lime glass
  In: Materials 14 (2021), Art.Nr.: 1831
  ISSN: 1996-1944
  DOI: 10.3390/ma14081831
• Xie L., Tan Z., Wu X., Chen Q., Xing J., Zhu J., Fan W.:
  Investigation of nonstoichiometric Fe on the ferroelectric properties of BiFeO3-based piezoelectric ceramics
  In: Journal of Solid State Chemistry (2021)
  ISSN: 0022-4596
  DOI: 10.1016/j.jssc.2021.122614
  URL: https://www.sciencedirect.com/science/article/pii/S0022459621006599

2020

• Agti FZ., Soltania MT., Santos LF., Messaouclie A., de Ligny D.:
  Study of New Antimony Phosphate Glasses
  In: Journal of New Technology and Materials 10 (2020), S. 64-69
  ISSN: 2170-161X
  DOI: 10.12816/0058537
• Belli R., Loher C., Petschelt A., Cicconi MR., de Ligny D., Anglada M., Lohbauer U.:
  Low-temperature degradation increases the cyclic fatigue resistance of 3Y-TZP in bending.
  In: Dental Materials 36 (2020), S. 1086-1095
  ISSN: 0109-5641
  DOI: 10.1016/j.dental.2070.05.002
• Belli R., Loher C., Petschelt A., Cicconi MR., de Ligny D., Anglada M., Lohbauer U.:
  Low-temperature degradation increases the cyclic fatigue resistance of 3Y-TZP in bending
  In: Dental Materials (2020)
  ISSN: 0109-5641
  DOI: 10.1016/j.dental.2020.05.002
• Benitez T., Rivas Murillo JS., de Ligny D., Travitzky N., Novaes de Oliveira AP., Hotza D.:
  Modeling the effect of the addition of alumina on structural characteristics and tensile deformation response of aluminosilicate glasses
  In: Ceramics International (2020)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2020.05.273
• Bergler M., Cvecek K., Werr F., Brehl M., de Ligny D., Schmidt M.:
  Cooling rate calibration and mapping of ultra-short pulsed laser modifications in fused silica by Raman and Brillouin spectroscopy
  In: International Journal of Extreme Manufacturing 2 (2020)
  ISSN: 2631-8644
  DOI: 10.1088/2631-7990/ab9583
  URL: https://iopscience.iop.org/article/10.1088/2631-7990/ab9583
• Bergler M., Cvecek K., Werr F., Brehl M., de Ligny D., Schmidt M.:
  Erratum: Cooling rate calibration and mapping of ultra-short pulsed laser modifications in fused silica by Raman and Brillouin spectroscopy (International Journal of Extreme Manufacturing DOI: 10.1088/2631-7990/ab9583)
  In: International Journal of Extreme Manufacturing 3 (2020), Art.Nr.: 019501
  ISSN: 2631-8644
  DOI: 10.1088/2631-7990/abc46d
• Biggemann J., Hoffmann P., Hristov I., Simon S., Müller P., Fey T.:
  Injection Molding of 3-3 Hydroxyapatite Composites
  In: Materials 13 (2020), Art.Nr.: 1907
  ISSN: 1996-1944
  DOI: 10.3390/ma13081907
  URL: https://www.mdpi.com/1996-1944/13/8/1907
• Biggemann J., Müller P., Köllner D., Simon S., Hoffmann P., Heik P., Lee JH., Fey T.:
  Hierarchical Surface Texturing of Hydroxyapatite Ceramics: Influence on the Adhesive Bonding Strength of Polymeric Polycaprolactone
  In: Journal of Functional Biomaterials 11 (2020), Art.Nr.: 73
  ISSN: 2079-4983
  DOI: 10.3390/jfb11040073
  URL: https://www.mdpi.com/2079-4983/11/4/73
• Bruns S., Uesbeck T., Fuhrmann S., Aymerich MT., Wondraczek L., de Ligny D., Durst K.:
  Indentation densification of fused silica assessed by raman spectroscopy and constitutive finite element analysis
  In: Journal of the American Ceramic Society (2020)
  ISSN: 0002-7820
  DOI: 10.1111/jace.17024
• Bruns S., Uesbeck T., Weil D., Möncke D., van Wüllen L., Durst K., de Ligny D.:
  Influence of Al2O3 Addition on Structure and Mechanical Properties of Borosilicate Glasses
  In: Frontiers in Materials 7 (2020), Art.Nr.: 189
  ISSN: 2296-8016
  DOI: 10.3389/fmats.2020.00189
• Cicconi MR., Blanc W., de Ligny D., Neuville DR.:
  The influence of codoping on optical properties and glass connectivity of silica fiber preforms
  In: Ceramics International (2020)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2020.05.233
• Cicconi MR., Khansur NH., Eckstein U., Werr F., Webber KG., de Ligny D.:
  Determining the local pressure during aerosol deposition using glass memory
  In: Journal of the American Ceramic Society 103 (2020), S. 2443-2452
  ISSN: 0002-7820
  DOI: 10.1111/jace.16947
• Cicconi MR., Le Losq C., Moretti R., Neuville DR.:
  Magmas are the Largest Repositories and Carriers of Earth's Redox Processes
  In: Elements 16 (2020), S. 173-178
  ISSN: 1811-5209
  DOI: 10.2138/gselements.16.3.173
• Cicconi MR., Lu Z., Uesbeck T., Van Wuellen L., Brauer DS., de Ligny D.:
  Influence of Vanadium on Optical and Mechanical Properties of Aluminosilicate Glasses
  In: Frontiers in Materials 7 (2020)
  ISSN: 2296-8016
  DOI: 10.3389/fmats.2020.00161
• Cicconi MR., Moretti R., Neuville DR.:
  Earth's Electrodes
  In: Elements 16 (2020), S. 157-160
  ISSN: 1811-5209
  DOI: 10.2138/gselements.16.3.157
• Dermeik B., Travitzky N.:
  Laminated Object Manufacturing of Ceramic-Based Materials
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000256
• Dietemann B., Bosna F., Lorenz MM., Travitzky N., Kruggel-Emden H., Kraft T., Bierwisch C.:
  Modeling robocasting with smoothed particle hydrodynamics: Printing gap-spanning filaments
  In: Additive Manufacturing 36 (2020), Art.Nr.: 101488
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101488
• Eichhorn F., Kellermann S., Betke U., Fey T.:
  Phase evolution, filler-matrix interactions, and piezoelectric properties in lead zirconate titanate (PZT)-filled polymer-derived ceramics (PDCs)
  In: Materials 13 (2020), Art.Nr.: 1520
  ISSN: 1996-1944
  DOI: 10.3390/ma13071520
• Elkholy H., Othman H., Hager I., Ibrahim M., de Ligny D.:
  Thermal and optical properties of binary magnesium tellurite glasses and their link to the glass structure
  In: Journal of Alloys and Compounds 823 (2020), Art.Nr.: 153781
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2020.153781
• Esper JD., Zhuo Y., Barr M., Yokosawa T., Spiecker E., de Ligny D., Bachmann J., Peukert W., Romeis S.:
  Shape-anisotropic cobalt-germanium-borate glass flakes as novel Li-ion battery anodes
  In: Powder Technology 363 (2020), S. 218-231
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2019.11.063
• Giese S., Bezold A., Pröbstle M., Heckl A., Neumeier S., Göken M.:
  The Importance of Diffusivity and Partitioning Behavior of Solid Solution Strengthening Elements for the High Temperature Creep Strength of Ni-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-06028-0
• Grammes T., Limbach R., Bruns S., Van Wuellen L., de Ligny D., Kamitsos E., Durst K., Wondraczek L., Brauer DS.:
  Tailoring the Mechanical Properties of Metaluminous Aluminosilicate Glasses by Phosphate Incorporation
  In: Frontiers in Materials 7 (2020)
  ISSN: 2296-8016
  DOI: 10.3389/fmats.2020.00115
• Groszewicz PB., Koch L., Steiner S., Ayrikyan A., Webber KG., Frömling T., Albe K., Buntkowsky G.:
  The fate of aluminium in (Na,Bi)TiO3-based ionic conductors
  In: Journal of Materials Chemistry A 8 (2020), S. 18188-18197
  ISSN: 2050-7488
  DOI: 10.1039/d0ta03554h
• Höhn S., Zheng K., Romeis S., Brehl M., Peukert W., de Ligny D., Virtanen S., Boccaccini AR.:
  Effects of Medium pH and Preconditioning Treatment on Protein Adsorption on 45S5 Bioactive Glass Surfaces
  In: Advanced Materials Interfaces (2020)
  ISSN: 2196-7350
  DOI: 10.1002/admi.202000420
• Kashkarov EB., Syrtanov MS., Sedanova EP., Ivashutenko AS., Lider AM., Travitzky N.:
  Fabrication of Paper-Derived Ti3SiC2-Based Materials by Spark Plasma Sintering
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000136
• Khansur NH., Biggemann J., Stumpf M., Rieß K., Fey T., Webber KG.:
  Temperature- and Stress-Dependent Electromechanical Response of Porous Pb(Zr,Ti)O3
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000389
• Khansur NH., Martin A., Rieß K., Nishiyama H., Hatano K., Wang K., Li JF., Kakimoto Ki., Webber KG.:
  Stress-modulated optimization of polymorphic phase transition in Li-doped (K,Na)NbO3
  In: Applied Physics Letters 117 (2020), Art.Nr.: 032901
  ISSN: 0003-6951
  DOI: 10.1063/5.0016072
• Klett J., Hassel T.:
  Reducing the risk of hydrogen-induced cold cracks in hyperbaric wet welding of high-strength steels by using austenitic welding consumables
  In: Welding and Cutting 19 (2020), S. 54-60
  ISSN: 1612-3433
• Li K., Kashkarov E., Syrtanov M., Sedanova E., Ivashutenko A., Lider A., Fan P., Yuan D., Travitzky N.:
  Preceramic paper-derived SiCf/SiCp composites obtained by spark plasma sintering: Processing, microstructure and mechanical properties
  In: Materials 13 (2020), Art.Nr.: 607
  ISSN: 1996-1944
  DOI: 10.3390/ma13030607
• Lorenz MM., Dietemann B., Wahl L., Bierwisch C., Kraft T., Kruggel-Emden H., Travitzky N.:
  Erratum to “Influence of platelet content on the fabrication of colloidal gels for robocasting: Experimental analysis and numerical simulation” [J. Eur. Ceramic Soc. 40 March (3) (2020) 811–825](S0955221919307150)(10.1016/j.jeurceramsoc.2019.10.044)
  In: Journal of the European Ceramic Society (2020)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2020.01.068
• Lorenz MM., Martin A., Webber KG., Travitzky N.:
  Electromechanical Properties of Robocasted Barium Titanate Ceramics
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000325
• Lyu J., Kashkarov EB., Travitzky N., Syrtanov MS., Lider AM.:
  Sintering of MAX-phase materials by spark plasma and other methods
  In: Journal of Materials Science (2020)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-020-05359-y
• Martin A., Khansur NH., Eckstein U., Rieß K., Kakimoto Ki., Webber KG.:
  High temperature piezoelectric response of polycrystalline Li-doped (K,Na)NbO3 ceramics under compressive stress
  In: Journal of Applied Physics 127 (2020), Art.Nr.: 114101
  ISSN: 0021-8979
  DOI: 10.1063/1.5134554
• Mashkov O., Körfer J., Eigen A., Yousefi Amin AA., Killilea NA., Barabash A., Sytnyk M., Khansur NH., Halik M., Webber KG., Heiß W.:
  Effect of Ligand Treatment on the Tuning of Infrared Plasmonic Indium Tin Oxide Nanocrystal Electrochromic Devices
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000112
• Myszka B., Schodder P., Leupold S., Barr M., Hurle K., Schüßler M., Demmert B., Biggemann J., Fey T., Boccaccini AR., Wolf S.:
  Shape Matters: Crystal Morphology and Surface Topography Alter Bioactivity of Bioceramics in Simulated Body Fluid
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000044
• Nishiyama H., Martin A., Hatano K., Kishimoto S., Sasaki N., Khansur NH., Webber KG., Kakimoto KI.:
  Electric-field-induced strain of (Li,Na,K)NbO3-based multilayered piezoceramics under electromechanical loading
  In: Journal of Applied Physics 128 (2020)
  ISSN: 0021-8979
  DOI: 10.1063/5.0029615
• Othman H., Elkholy H., Cicconi MR., Palles D., de Ligny D., Kamitsos EI., Möncke D.:
  Spectroscopic study of the role of alkaline earth oxides in mixed borate glasses - site basicity, polarizability and glass structure
  In: Journal of Non-Crystalline Solids 533 (2020), Art.Nr.: 119892
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2020.119892
• Picht G., Khansur NH., Webber KG., Kungl H., Hoffmann MJ., Hinterstein M.:
  Grain size effects in donor doped lead zirconate titanate ceramics
  In: Journal of Applied Physics 128 (2020), Art.Nr.: 214105
  ISSN: 0021-8979
  DOI: 10.1063/5.0029659
• Prado A., Camargo J., Öchsner PE., Ramajo L., Castro M.:
  Synthesis and characterization of Bi0.5Na0.5TiO3-BaTiO3-K0.5Na0.5NbO3 ceramics for energy storage applications
  In: Journal of Electroceramics (2020)
  ISSN: 1385-3449
  DOI: 10.1007/s10832-020-00216-5
• Sedanova EP., Kashkarov EB., Lider AM., Abdullina KR., Mingazova YR., Travitzky N.:
  SiC- and Ti3SiC2-Based Ceramics Synthesis by Spark Plasma Sintering of Preceramic Paper
  International Conference for Young Scientists on Issues of Physics and Technology in Science, Power Industry and Medicine 2019, IPTSPIM 2019 (Tomsk, 30. September 2019 - 5. Oktober 2019)
  In: Journal of Physics: Conference Series 2020
  DOI: 10.1088/1742-6596/1443/1/012007
• Sedanova EP., Kashkarov EB., Syrtanov MS., Abdullina KR., Mingazova YR., Lider AM., Travitzky N.:
  Influence of preceramic paper composition on microstructure and mechanical properties of spark plasma sintered Ti3SiC2-based composites
  17th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2020 (Tomsk, 21. April 2020 - 24. April 2020)
  In: Journal of Physics: Conference Series 2020
  DOI: 10.1088/1742-6596/1611/1/012007
• Shi X., Kumar N., Hoffman M.:
  Electrical fatigue behavior of NBT-BT-x KNN ferroelectrics: effect of ferroelectric phase transformations and oxygen vacancies
  In: Journal of Materials Chemistry C (2020)
  ISSN: 2050-7526
• Shi X., Kumar N., Hoffman M.:
  Electrical fatigue in 0.94 Na0. 5Bi0. 5TiO3–0.06 BaTiO3: Influence of the surface layer
  In: Applied Physics Letters (2020)
  ISSN: 1077-3118
• Shi X., Kumar N., Hoffman M.:
  Spontaneous relaxor to ferroelectric transition in lead-free relaxor piezoceramics and the role of point defects
  In: Journal of the European Ceramic Society (2020)
  ISSN: 0955-2219
• Shi X., Kumar N., kong s., sharma p., vats g., Checchia S., Seidel J., Hoffman M., Daniels J.:
  Functional surface layers in relaxor ferroelectrics
  In: Journal of Materials Chemistry C (2020)
  ISSN: 2050-7526
• Shi X., Li ky., Kumar N., Hoffman M., Elter M., Checchia S., Winter J., Lemos da Silva L., Seifert D., Hinterstein M.:
  Electric-field-induced phase transformation and frequency-dependent behavior of bismuth sodium titanate-barium titanate
  In: Materials 13 (2020), Art.Nr.: 1054
  ISSN: 1996-1944
  DOI: 10.3390/ma13051054
• Shi X., Li ky., Kumar N., Hoffman M., Etter M., Winter J., Lemos da Silva L., Seifert D., Hinterstein M.:
  The complex structural mechanisms behind strain curves in bismuth sodium titanate–barium titanate
  In: Applied Physics Letters (2020)
  ISSN: 1077-3118
• Stoll T., Trautnitz P., Schmiedeke S., Franke J., Travitzky N.:
  Process development for laser powder bed fusion of pure copper
  In: Proceedings of SPIE Proceedings Volume 11271, Laser 3D Manufacturing VII; 112710I (2020) (2020)
  DOI: 10.1117/12.2563870
• Travitzky N., Boccaccini AR., Göken M.:
  The Department of Materials Science and Engineering at the Friedrich-Alexander-University of Erlangen-Nürnberg
  In: Advanced Engineering Materials 22 (2020), Art.Nr.: 2000921
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000921
• Veber A., Smedskjaer MM., de Ligny D.:
  Relaxation behavior of densified sodium aluminoborate glass
  In: Acta Materialia 198 (2020), S. 153-167
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2020.07.068
• Werr F., Veber A., Brehl M., Bergler M., Werner D., Eppelt U., Müllers L., de Ligny D.:
  Surface Probing of Ultra-Short-Pulse Laser Filament Cut Window Glass and the Impact on the Separation Behavior
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000471
• Winkler S., Mutschall H., Biggemann J., Fey T., Greil P., Körner C., Weisbach VG., Meyer-Lindenberg A., Arkudas A., Horch RE., Steiner D.:
  Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model
  In: Tissue Engineering - Part A (2020)
  ISSN: 1937-335X
  DOI: 10.1089/ten.tea.2020.0087
• Wu HC., Hsieh DJ., Yen TW., Sun PJ., Kakarla DC., Her JL., Matsuda YH., Chang CK., Lai YC., Gooch M., Deng LZ., Webber KG., Lee CA., Chou MMC., Chu CW., Yang HD.:
  Pressure and magnetic field effects on ferroelastic and antiferromagnetic orderings in honeycomb-lattice Mn2V2O7
  In: Physical Review B 102 (2020)
  ISSN: 2469-9950
  DOI: 10.1103/PhysRevB.102.075130
• Yadav P., Fu Z., Knorr M., Travitzky N.:
  Binder Jetting 3D Printing of Titanium Aluminides Based Materials: A Feasibility Study
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000408
• Zhao Y., Miao P., Elia J., Hu H., Wang X., Heumüller T., Hou Y., Matt G., Osvet A., Chen YT., Tarragó M., de Ligny D., Przybilla T., Denninger P., Will J., Zhang J., Tang X., Li N., He C., Pan A., Meixner AJ., Spiecker E., Zhang D., Brabec C.:
  Strain-activated light-induced halide segregation in mixed-halide perovskite solids
  In: Nature Communications 11 (2020), Art.Nr.: 6328
  ISSN: 2041-1723
  DOI: 10.1038/s41467-020-20066-7

2019

• Al Nasiri N., Patra N., Pezoldt M., Colas J., Lee WE.:
  Investigation of a single-layer EBC deposited on SiC/SiC CMCs: Processing and corrosion behaviour in high-temperature steam
  In: Journal of the European Ceramic Society 39 (2019), S. 2703-2711
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.12.019
• Ando D., Eichhorn F., Fey T., Kakimoto Ki.:
  Secondary Pyroelectric Effect and Figure of Merit of Ferroelectric 0–3 Composites
  In: Advanced Engineering Materials (2019), Art.Nr.: 1900241
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900241
• Bei G., Mackovic M., Spiecker E., Greil P.:
  Low-temperature oxidation-induced crack healing in Ti2Al0.5Sn0.5C–Al2O3 composites
  In: International Journal of Applied Ceramic Technology 16 (2019), S. 1744-1751
  ISSN: 1546-542X
  DOI: 10.1111/ijac.13315
• Benitez T., Veber A., Furlan KP., Reboucas LB., de Ligny D., Hotza D., Novaes De Oliveira AP., Travitzky N.:
  Development of magnesium-aluminum-silicate glass-ceramics nucleated with Nb2O5
  In: International Journal of Applied Glass Science (2019)
  ISSN: 2041-1286
  DOI: 10.1111/ijag.13874
• Böhm C., Harris J., Schodder P., Wolf S.:
  Bioinspired materials: From living systems to new concepts in materials chemistry
  In: Materials 12 (2019), Art.Nr.: 2117
  ISSN: 1996-1944
  DOI: 10.3390/ma12132117
• Cicconi MR., Neuville DR.:
  Natural Glasses
  In: J. David Musgraves, Juejun Hu, Laurent Calvez (Hrsg.): Springer Handbook of Glass, Springer, 2019, S. 771-812 (Springer Handbooks)
  DOI: 10.1007/978-3-319-93728-1_22
• Cornet A., Martinet C., Martinez V., de Ligny D.:
  Evidence of polyamorphic transitions during densified SiO2 glass annealing
  In: Journal of Chemical Physics 151 (2019), Art.Nr.: 164502
  ISSN: 0021-9606
  DOI: 10.1063/1.5121534
• Cvecek K., Heberle J., Bergler M., Miyamoto I., de Ligny D., Schmidt M.:
  Glass machining and in-situ metrology: Recovery of spatio-temporal phase distribution from 2-dimensional interference fringe movement caused by irradiation of glass with ultra-short laser pulses at high pulse repetition rates
  CLEO: Applications and Technology, CLEO_AT 2019 (San Jose, CA, 5. Mai 2019 - 10. Mai 2019)
  In: Optics InfoBase Conference Papers 2019
  DOI: 10.1364/CLEO_AT.2019.ATu3I.1
• Demmert B., Schinzel F., Schüßler M., Mondeshki M., Kaschta J., Schubert DW., Jacob DE., Wolf S.:
  Polymer-functionalised nanograins of Mg-doped amorphous calcium carbonate via a flow-chemistry approach
  In: Materials 12 (2019), Art.Nr.: 1818
  ISSN: 1996-1944
  DOI: 10.3390/ma12111818
• Dermeik B., Lorenz H., Bonet A., Travitzky N.:
  Highly Filled Papers, on their Manufacturing, Processing, and Applications
  In: Advanced Engineering Materials 21 (2019), Art.Nr.: 1900180
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900180
• Eckstein U., Detsch R., Khansur NH., Brehl M., Deisinger U., de Ligny D., Boccaccini AR., Webber KG.:
  Bioactive glass coating using aerosol deposition
  In: Ceramics International (2019)
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2019.04.197
• Eichhorn F., Kakimoto Ki., Greil P., Fey T.:
  Influence of Porosity Orientation on Physical Properties in Porous PZT Ceramics
  In: Advanced Engineering Materials (2019), Art.Nr.: 1900390
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900390
• Elkholy H., Othman H., Hager I., Ibrahim M., de Ligny D.:
  Europium-Doped Tellurite Glasses: The Eu2+ Emission in Tellurite, Adjusting Eu2+ and Eu3+ Emissions toward White Light Emission
  In: Materials 12 (2019)
  ISSN: 1996-1944
  DOI: 10.3390/ma12244140
• Elsayed H., Chmielarz A., Potoczek M., Fey T., Colombo P.:
  Direct ink writing of three dimensional Ti2AlC porous structures
  In: Additive Manufacturing 28 (2019), S. 365-372
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.05.018
• Fey T., Scheffler M., Travitzky N.:
  Celebrating the 65(th) Birthday of Professor Peter Greil
  In: Advanced Engineering Materials 21 (2019)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900484
• Filardo G., Roffi A., Fey T., Fini M., Giavaresi G., Marcacci M., Martínez-Fernández J., Martini L., Ramírez-Rico J., Salamanna F., Sandri M., Sprio S., Tampieri A., Kon E.:
  Vegetable hierarchical structures as template for bone regeneration: New bio-ceramization process for the development of a bone scaffold applied to an experimental sheep model
  In: Journal of Biomedical Materials Research Part B: Applied Biomaterials (2019)
  ISSN: 1552-4973
  DOI: 10.1002/jbm.b.34414
• Gelse K., Biggemann J., Stumpf M., Halmheu M., Grüneboom A., Scholtysek C., Pachowsky M., Kleyer A., Hueber A., Krönke G., Fey T.:
  Modular lattice constructs for biological joint resurfacing
  In: Tissue Engineering: Parts A, B, and C (2019)
  ISSN: 1937-3368
  DOI: 10.1089/ten.TEA.2018.0231
• Greil P.:
  Self-Healing Engineering Ceramics with Oxidation-Induced Crack Repair
  In: Advanced Engineering Materials (2019)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201901121
• Hajian A., Brehl M., Koch T., Zellner C., Schwarz S., Konegger T., de Ligny D., Schmid U.:
  Wet-chemical porosification of LTCC substrates: Dissolution mechanism and mechanical properties
  In: Microporous and Mesoporous Materials 288 (2019), Art.Nr.: 109593
  ISSN: 1387-1811
  DOI: 10.1016/j.micromeso.2019.109593
• Harris J., Mey IP., Böhm C., Trinh H., Leupold S., Prinz C., Tripal P., Palmisano R., Wolf S.:
  Ultra-smooth and space-filling mineral films generated via particle accretion processes
  In: Nanoscale Horizons 4 (2019), S. 1388-1393
  ISSN: 2055-6756
  DOI: 10.1039/c9nh00175a
• Kashkarov EB., Syrtanov MS., Sedanova EP., Ivashutenko AS., Lider AM., Travitzky N.:
  Synthesis of Ti3SiC2-based composites by spark plasma sintering of preceramic papers
  16th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2019 (Tomsk, 23. April 2019 - 26. April 2019)
  In: Mikhail Semenov, Anna Bogdan (Hrsg.): IOP Conference Series: Materials Science and Engineering 2019
  DOI: 10.1088/1757-899X/597/1/012058
• Khansur NH., Eckstein U., Li Y., Hall DA., Kaschta J., Webber KG.:
  Revealing the effects of aerosol deposition on the substrate-film interface using NaCl coating
  In: Journal of the American Ceramic Society (2019)
  ISSN: 0002-7820
  DOI: 10.1111/jace.16489
  URL: https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.16489
• Khansur NH., Eckstein U., Li Y., Hall DA., Kaschta J., Webber KG.:
  Revealing the effects of aerosol deposition on the substrate‐film interface using NaCl coating
  In: Journal of the American Ceramic Society (2019)
  ISSN: 0002-7820
  DOI: 10.1111/jace.16489
  URL: https://ceramics.onlinelibrary.wiley.com/doi/full/10.1111/jace.16489
• Khansur NH., Eckstein U., Sadl M., Ursic H., Webber KG.:
  Fabrication of porous thick films using room-temperature aerosol deposition
  In: Journal of the American Ceramic Society (2019)
  ISSN: 0002-7820
  DOI: 10.1111/jace.16772
• Knyazeva AG., Travitzky N.:
  Controlled Bulk Synthesis of Composites
  In: Russian Physics Journal (2019)
  ISSN: 1064-8887
  DOI: 10.1007/s11182-019-01868-9
• Le Losq C., Cicconi MR., Greaves GN., Neuville DR.:
  Silicate Glasses
  In: J. David Musgraves, Juejun Hu, Laurent Calvez (Hrsg.): Springer Handbook of Glass, Springer, 2019, S. 441-503 (Springer Handbooks)
  DOI: 10.1007/978-3-319-93728-1_13
• Li Y., Liu Y., Öchsner PE., Isaia D., Zhang Y., Wang K., Webber KG., Li JF., Rödel J.:
  Temperature dependent fracture toughness of KNN-based lead-free piezoelectric ceramics
  In: Acta Materialia 174 (2019), S. 369-378
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.05.060
• Lorenz MM., Dietemann B., Wahl L., Bierwisch C., Kraft T., Kruggel-Emden H., Travitzky N.:
  Influence of platelet content on the fabrication of colloidal gels for robocasting: Experimental analysis and numerical simulation
  In: Journal of the European Ceramic Society (2019)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.10.044
• Martin A., Ursic H., Rojac T., Webber KG.:
  Direct observation of the stress-induced domain structure in lead-free (Na1/2Bi1/2) TiO3-based ceramics
  In: Applied Physics Letters 114 (2019), Art.Nr.: 052901
  ISSN: 0003-6951
  DOI: 10.1063/1.5084255
• Martin A., Ursic H., Rojac T., Webber KG.:
  Direct observation of the stress-induced domain structure in lead-free (Na1/2Bi1/2) TiO3-based ceramics
  In: Applied Physics Letters 114 (2019), Art.Nr.: ARTN 052901
  ISSN: 0003-6951
  DOI: 10.1063/1.5084255
• Medrano-Pesqueira CL., Brown F., Moncke D., de Ligny D., Tanori J., Del Castillo-Castro T.:
  Structural and optical characterization of crystals obtained via solid state reactions in the In2O3-TiO2-Al2O3 pseudoternary system
  In: SN Applied Sciences 1 (2019)
  ISSN: 2523-3963
  DOI: 10.1007/s42452-019-0504-6
• Moulton BJ., Henderson GS., Martinet C., Martinez V., Sonneville C., de Ligny D.:
  Structure—longitudinal sound velocity relationships in glassy anorthite (CaAl2Si2O8) up to 20 GPa: An in situ Raman and Brillouin spectroscopy study
  In: Geochimica Et Cosmochimica Acta 261 (2019), S. 132-144
  ISSN: 0016-7037
  DOI: 10.1016/j.gca.2019.06.047
• Myszka B., Schüßler M., Hurle K., Demmert B., Detsch R., Boccaccini AR., Wolf S.:
  Phase-specific bioactivity and altered Ostwald ripening pathways of calcium carbonate polymorphs in simulated body fluid
  In: RSC Advances 9 (2019), S. 18232-18244
  ISSN: 2046-2069
  DOI: 10.1039/c9ra01473j
• Novak N., Keil P., Froemling T., Schader F., Martin A., Webber KG., Roedel J.:
  Influence of metal/semiconductor interface on attainable piezoelectric and energy harvesting properties of ZnO
  In: Acta Materialia 162 (2019), S. 277-283
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.10.008
• Obmann R., Schoerpf S., Gorsche C., Liska R., Fey T., Konegger T.:
  Porous polysilazane-derived ceramic structures generated through photopolymerization-assisted solidification templating
  In: Journal of the European Ceramic Society 39 (2019), S. 838-845
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.11.045
• Prado A., Ramajo L., Camargo J., del Campo A., Öchsner PE., Rubio-Marcos F., Castro M.:
  Stabilization of the morphotropic phase boundary in (1 − x)Bi0.5Na0.5TiO3–xBaTiO3 ceramics through two alternative synthesis pathways
  In: Journal of Materials Science: Materials in Electronics 30 (2019), S. 18405-18412
  ISSN: 0957-4522
  DOI: 10.1007/s10854-019-02194-z
• Rieß K., Geiger P., Khansur NH., Steiner S., Frömling T., Hinterstein M., Webber KG.:
  Influence of the annealing conditions on temperature-dependent ferroelastic behavior of LSCF
  In: Materialia 6 (2019), Art.Nr.: 100297
  ISSN: 2589-1529
  DOI: 10.1016/j.mtla.2019.100297
• Schelm K., Fey T., Dammler K., Betke U., Scheffler M.:
  Hierarchical-Porous Ceramic Foams by a Combination of Replica and Freeze Technique
  In: Advanced Engineering Materials (2019)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201801362
• Sedanova EP., Syrtanov MS., Kashkarov EB., Yurovskikh AS., Travitzky N.:
  Ultrasonic tomography of SiC-based materials synthesized by spark plasma sintering of preceramic paper
  5th International Conference on Innovations in Non-Destructive Testing SibTest 2019, NDTS 2019 (Yekaterinburg, RUS, 26. Juni 2019 - 28. Juni 2019)
  In: Journal of Physics: Conference Series 2019
  DOI: 10.1088/1742-6596/1327/1/012043
• Shi X., Kumar N., Jones J., Hoffman M.:
  Electrical fatigue failure in (Na1/2Bi1/2) TiO3–BaTiO3 relaxor ceramics
  In: Journal of the American Ceramic Society (2019)
  ISSN: 0002-7820
• Steiner D., Lang G., Fischer L., Winkler S., Fey T., Greil P., Scheibel T., Horch RE., Arkudas A.:
  Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model
  In: Tissue Engineering: Parts A, B, and C (2019)
  ISSN: 1937-3368
  DOI: 10.1089/ten.tea.2018.0360
• Stumpf M., Fan X., Biggemann J., Greil P., Fey T.:
  Topological interlocking and damage mechanisms in periodic Ti2AlC-Al building block composites
  In: Journal of the European Ceramic Society 39 (2019), S. 2003-2009
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.01.047
  URL: https://authors.elsevier.com/c/1YbUm3PCJlBdlx
• Stumpf M., Köllner D., Biggemann J., Schüßler M., Greil P., Fey T.:
  Encapsulation of Reactive Ti2AlC and Nb2AlC Particles via a Boehmite Precipitation Route
  In: Advanced Engineering Materials 21 (2019), Art.Nr.: 1900048
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900048
• Taxis J., von Wilmowsky C., Pedimonte B., Beuscher HU., Ries J., Kesting MR., Möst T.:
  The influence of nanoporous anodic aluminum oxide on the initial adhesion of Streptococcus mitis and mutans
  In: Journal of Biomedical Materials Research Part B: Applied Biomaterials (2019)
  ISSN: 1552-4973
  DOI: 10.1002/jbm.b.34514
• Wahl L., Lorenz MM., Biggemann J., Travitzky N.:
  Robocasting of reaction bonded silicon carbide structures
  In: Journal of the European Ceramic Society (2019)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.06.049
• Wang L., Fu Z., Süß-Wolf R., Travitzky N., Greil P., Franke J.:
  Laser-Associated Selective Metallization of Ceramic Surface With Infrared Nanosecond Laser Technology
  In: Advanced Engineering Materials 10 (2019), S. 1900096
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900096
• Wang S., Ayrikyan A., Zhang H., Webber KG., Xu BX.:
  Phase-Field Study of Electromechanical Coupling in Lead-Free Relaxor/Ferroelectric-Layered Composites
  In: Advanced Electronic Materials 5 (2019)
  ISSN: 2199-160X
  DOI: 10.1002/aelm.201800710
• Yadav P., Bock T., Fu Z., Lorenz H., Gotman I., Greil P., Travitzky N.:
  Novel Hybrid Printing of Porous TiC/Ti6Al4V Composites
  In: Advanced Engineering Materials (2019), Art.Nr.: 1900336
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900336
• de Clermont-Gallerande J., Dutreilh-Colas M., Célarié F., Gueguen Y., Bergler M., de Ligny D., Hayakawa T., Thomas P.:
  Correlation between mechanical and structural properties as a function of temperature within the TeO2–TiO2–ZnO ternary system
  In: Journal of Non-Crystalline Solids (2019), Art.Nr.: 119716
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2019.119716
• de Ligny D., Möncke D.:
  Colors in Glasses
  In: J. David Musgraves, Juejun Hu, Laurent Calvez (Hrsg.): Springer Handbook of Glass, Springer, 2019, S. 297-342 (Springer Handbooks)
  DOI: 10.1007/978-3-319-93728-1_9

2018

• Angeli F., Charpentier T., Jollivet P., de Ligny D., Bergler M., Veber A., Gin S., Li H.:
  Effect of thermally induced structural disorder on the chemical durability of International Simple Glass
  In: npj Materials Degradation 2 (2018), S. 31
  ISSN: 2397-2106
  DOI: 10.1038/s41529-018-0052-3
• Ayrikyan A., Prach O., Khansur NH., Keller S., Yasui S., Itoh M., Sakata O., Durst K., Webber KG.:
  Investigation of residual stress in lead-free BNT-based ceramic/ceramic composites
  In: Acta Materialia 148 (2018), S. 432-441
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.02.014
• Bachy B., Süß-Wolf R., Wang L., Fu Z., Travitzky N., Greil P., Franke J.:
  Novel Ceramic-Based Material for the Applications of Molded Interconnect Devices (3D-MID) Based on Laser Direct Structuring
  In: Advanced Engineering Materials 20 (2018), Art.Nr.: 1700824
  ISSN: 1438-1656
  DOI: 10.1002/adem.201700824
• Belli R., Wendler M., Cicconi MR., de Ligny D., Petschelt A., Werbach K., Peterlik H., Lohbauer U.:
  Fracture anisotropy in texturized lithium disilicate glass-ceramics
  In: Journal of Non-Crystalline Solids 481 (2018), S. 457-469
  ISSN: 0022-3093
  DOI: 10.1016/j.jnoncrysol.2017.11.040
• Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Automated 3D assembly of periodic alumina-epoxy composite structures
  In: Journal of the American Ceramic Society (2018)
  ISSN: 0002-7820
  DOI: 10.1111/jace.15586
• Biggemann J., Diepold B., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Automated 3D assembly of periodic alumina‐epoxy composite structures
  In: Journal of the American Ceramic Society 101 (2018), S. 3864-3873
  ISSN: 1551-2916
  DOI: 10.1111/jace.15586
• Biggemann J., Pezoldt M., Stumpf M., Greil P., Fey T.:
  Modular ceramic scaffolds for individual implants
  In: Acta Biomaterialia 80 (2018), S. 390-400
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2018.09.008
• Cvecek K., Miyamoto I., Heberle J., Bergler M., de Ligny D., Schmidt M.:
  Analysis of shockwave formation in glass welding by ultra-short pulses
  10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth, 3. September 2018 - 6. September 2018)
  In: Michael Schmidt (Hrsg.): Procedia CIRP 2018
  DOI: 10.1016/j.procir.2018.08.128
• Fey T., Stumpf M., Chmielarz A., Colombo P., Greil P., Potoczek M.:
  Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams
  In: Journal of the European Ceramic Society 38 (2018), S. 3424-3432
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.04.012
• Fey T., Stumpf M., Chmielarz AM., Colombo P., Greil P., Potoczek M.:
  Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams
  In: Journal of the European Ceramic Society 38 (2018), S. 3424-3432
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.04.012
• Froemling T., Steiner S., Ayrikyan A., Bremecker D., Duerrschnabel M., Molina-Luna L., Kleebe HJ., Hutter H., Webber KG., Acosta M.:
  Designing properties of (Na1/2Bi: X)TiO3-based materials through A-site non-stoichiometry
  In: Journal of Materials Chemistry C 6 (2018), S. 738-744
  ISSN: 2050-7526
  DOI: 10.1039/c7tc03975a
• Geiger P., Khansur NH., Rieß K., Martin A., Hinterstein M., Webber KG.:
  Stress-dependent crystal structure of lanthanum strontium cobalt ferrite by in situ synchrotron X-ray diffraction
  In: Journal of Applied Physics 123 (2018), Art.Nr.: 075104
  ISSN: 1089-7550
  DOI: 10.1063/1.5017934
• Kaeswurm B., Daniel L., Webber KG.:
  The Anhysteretic Polarisation of Ferroelectrics
  In: Journal of Physics D: Applied Physics 51 (2018), Art.Nr.: 075305
  ISSN: 0022-3727
  DOI: 10.1088/1361-6463/aaa698
• Kaeswurm B., Schader F., Webber KG.:
  Ferroelectric, Ferroelastic, Piezoelectric, and Dielectric Properties of Lead Zirconate Titanate from –150°C to 350°C
  In: Ceramics International 44 (2018), S. 2358-2363
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2017.10.204
• Khansur NH., Eckstein U., Benker L., Deisinger U., Merle B., Webber KG.:
  Room temperature deposition of functional ceramic films on low-cost metal substrate
  In: Ceramics International 44 (2018), S. 16295-16301
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2018.06.027
• Khansur NH., Eckstein U., Rieß K., Martin A., Drnec J., Deisinger U., Webber KG.:
  Synchrotron x-ray microdiffraction study of residual stresses in BaTiO3 films deposited at room temperature by aerosol deposition
  In: Scripta Materialia 157 (2018), S. 86-89
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2018.07.045
• Koruza J., Bell AJ., Frömling T., Webber KG., Wang K., Rödel J.:
  Requirements for the transfer of lead-free piezoceramics into application
  In: Journal of Materiomics 4 (2018), S. 13-26
  ISSN: 2352-8478
  DOI: 10.1016/j.jmat.2018.02.001
• Martin A., Khansur NH., Rieß K., Webber KG.:
  Frequency dependence of the relaxor-to-ferroelectric transition under applied electrical and mechanical fields
  In: Journal of the European Ceramic Society (2018)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.12.026
• Martin A., Khansur NH., Webber KG.:
  Electric field-induced changes in the ferroelastic behavior of (Na1/2Bi1/2)TiO3-BaTiO3
  In: Journal of the European Ceramic Society 38 (2018), S. 4623-4630
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.06.017
• Martin A., Khansur NH., Webber KG.:
  Electric field-induced changes in the ferroelastic behavior of (Na1/2Bi1/2)TiO3-BaTiO3
  In: Journal of the European Ceramic Society 38 (2018), S. 4623-4630
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.06.017
• Menge G., Lorenz H., Fu Z., Eichhorn F., Schader F., Webber KG., Fey T., Greil P., Travitzky N.:
  Paper-Derived Ferroelectric Ceramics: A Feasibility Study
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800052
• Miguez-Pacheco V., de Ligny D., Schmidt J., Detsch R., Boccaccini AR.:
  Development and characterization of niobium-releasing silicate bioactive glasses for tissue engineering applications
  In: Journal of the European Ceramic Society 38 (2018), S. 871-876
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2017.07.028
• Muniz RF., de Ligny D., Sandrini M., Zanuto VS., Medina AN., Rohling JH., Aranda NB., Baesso ML., Guyot Y.:
  Fluorescence line narrowing and Judd-Ofelt theory analyses of Eu3+-doped low-silica calcium aluminosilicate glass and glass-ceramic
  In: Journal of Luminescence 201 (2018), S. 123-128
  ISSN: 0022-2313
  DOI: 10.1016/j.jlumin.2018.04.027
• Schader F., Isaia D., Weber M., Aulbach E., Webber KG.:
  High-temperature stress-dependent piezoelectric and dielectric coefficient of soft Pb(Zr,Ti)O-3
  In: Journal of Materials Science 53 (2018), S. 3296-3308
  ISSN: 0022-2461
  DOI: 10.1007/s10853-017-1817-8
• Segouin V., Kaeswurm B., Webber KG., Daniel L.:
  Temperature-dependent anhysteretic behavior of co-doped PZT
  In: Journal of Applied Physics (2018), Art.Nr.: 104103
  ISSN: 1089-7550
  DOI: 10.1063/1.5040556
• Shi X., Kumar N., Hoffman M.:
  Electric field–temperature phase diagrams for (Bi 1/2 Na 1/2) TiO 3–BaTiO 3–(K 1/2 Na 1/2) NbO 3 relaxor ceramics
  In: Journal of Materials Chemistry C (2018)
  ISSN: 2050-7526
• Steiner D., Lingens L., Fischer L., Köhn K., Detsch R., Boccaccini AR., Fey T., Greil P., Weis C., Beier J., Horch RE., Arkudas A.:
  Encapsulation of Mesenchymal Stem Cells Improves Vascularization of Alginate-Based Scaffolds.
  In: Tissue Engineering: Parts A, B, and C 24 (2018), S. 1320-1331
  ISSN: 1937-3368
  DOI: 10.1089/ten.TEA.2017.0496
• Stumpf M., Biggemann J., Fey T., Kakimoto KI., Greil P.:
  Nb2AlC-Particle-Reinforced ZrO2-Matrix Composites
  In: Journal of Ceramic Science and Technology 9 (2018), S. 271-278
  ISSN: 2190-9385
  DOI: 10.4416/JCST2018-00013
• Stumpf M., Biggemann J., Fey T., Kakimoto KI., Greil P.:
  Thermochemical calculations of the oxidation behavior of Nb2AlC MAX phase in ZrO2–matrix composites
  In: Ceramics International 44 (2018), S. 15747-15753
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2018.05.249
• Stumpf M., Fey T., Kakimoto K., Greil P.:
  Nb2AlC-particle induced accelerated crack healing in ZrO2–matrix composites
  In: Ceramics International 44 (2018), S. 19352-19361
  ISSN: 0272-8842
  DOI: 10.1016/j.ceramint.2018.07.164
  URL: https://www.sciencedirect.com/science/article/pii/S0272884218319072
• Stumpf M., Travitzky N., Greil P., Fey T.:
  Sol-gel infiltration of complex cellular indirect 3D printed alumina
  In: Journal of the European Ceramic Society 38 (2018), S. 3603-3609
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2018.04.023
• Unterweger H., Dezsi L., Matuszak J., Janko C., Poettler M., Jordan J., Bäuerle T., Szebeni J., Fey T., Boccaccini AR., Alexiou C., Cicha I.:
  Dextran-coated superparamagnetic iron oxide nanoparticles for magnetic resonance imaging: Evaluation of size-dependent imaging properties, storage stability and safety
  In: International Journal of Nanomedicine 13 (2018), S. 1899-1915
  ISSN: 1176-9114
  DOI: 10.2147/IJN.S156528
• Veber A., Cicconi MR., Reinfelder H., de Ligny D.:
  Combined Differential scanning calorimetry, Raman and Brillouin spectroscopies: A multiscale approach for materials investigation
  In: Analytica Chimica Acta 998 (2018), S. 37-44
  ISSN: 0003-2670
  DOI: 10.1016/j.aca.2017.09.045
• Xie L., Liang XJ., Tan Z., Jiang L., Chen Q., Wu J., Zhang W., Xiao D., Zhu J.:
  Comprehensive investigation of structural and electrical properties of (Bi, Na) CoZrO3-doped KNN ceramics
  In: Journal of Alloys and Compounds (2018)
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.05.10
  URL: https://www.sciencedirect.com/science/article/pii/S0925838818317870